What does ADXL345 measure?

What does ADXL345 measure?

The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. It measures the static acceleration of gravity in tilt-sensing appli- cations, as well as dynamic acceleration resulting from motion or shock.

What is the use of ADXL345 accelerometer?

The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°.

What is 16g accelerometer?

3-Axis Digital Accelerometer is the key part in projects like orientation detection, gesture detection and Motion detection. This 3-Axis Digital Accelerometer(±16g) is based on low power consumption IC ADXL345. It features up to 10,000g high shock survivability and configurable Samples per Second rate.

How do you use ADXL345 accelerometer?

Setting up the Arduino Accelerometer Circuit

1. Wire the GND pin of the ADXl345 to the GND Pin on the Arduino.
2. Wire the VCC pin of the ADXL345 to the 3v3 Pin on the Arduino.
3. Wire the SCL pin of the ADXL345 to the SCL Pin on the Arduino.
4. Wire the SDA pin of the ADXL345 to the SCL Pin on the Arduino.

Is ADXL345 analog or digital?

The ADXL345 is a digital-output, 3-axis accelerometer whose low power consumption and built-in features make it ideal for use in a wide variety of applications.

Is accelerometer digital or analog?

The choice between analog and digital is dictated by the hardware used. Analog accelerometers have an output that is a continuous voltage proportional to the acceleration. Digital accelerometers typically use pulse width modulation so that there is a square wave at a certain frequency.

How does a digital accelerometer work?

An accelerometer is a device that measures the vibration, or acceleration of motion of a structure. The force caused by vibration or a change in motion (acceleration) causes the mass to “squeeze” the piezoelectric material which produces an electrical charge that is proportional to the force exerted upon it.

Can you use an Arduino controller with an adxl345?

Using the ADXL345 with the Arduino is quite easy if you use the I2C interface, as this allows to controller to operate at 5V and the ADXL345 to operate at 3V3. Note: In I2C mode the SDO pin is an input, selecting an address.

What is the sensitivity of the adxl345 digital accelerometer?

The Adafruit Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G.

How big is the resolution of the adxl345?

It can measure accelerations up to 16g with 13bit resolution translating to a resolution of 3.9mg (g representing gravity at 9.8m/s 2 ). To make it more useful, it has several built in functions: Thresholds. Tapping. Falling. Self test.

How does the Adafruit adxl345 accelerometer breakout board work?

The ADXL345 is a low-power, 3-axis MEMS accelerometer modules with both I2C and SPI interfaces. The Adafruit Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino.