Contents
Is the Zigbee XBee a coordinator or router?
The parent helps end devices join the network and stores messages for them when they are asleep. ZigBee networks may have any number of end devices. In fact, a network can be composed of one coordinator, multiple end devices, and zero routers. The XBee ZigBee RF Module is in Receive Mode when it is not transmitting data.
What happens when XBee is placed in command mode?
Any characters typed will be immediately transmitted to the node assigned by the “Destination Address”. If the machine is placed in the Command Mode state, the code checks for a valid command entered by the user. If the command is valid, the XBee module is placed in Command Mode and the entered AT command is executed.
Do You need X-CTU software for XBee?
The X-CTU software provided for free by Digi International is still required to configure the XBee modules as Coordinators, Routers, or End Devices, and to switch between AT and API mode. For examples of how to configure XBee modules using X-CTU software, click here .
What kind of microcontroller does XBee PRO use?
For this particular project, the XBee module used was an XBee-PRO ZigBee module (XBP24BZ7WIT-004). A wireless Arduino shield (A000065) was used to interface the XBee module to the host microcontroller.
What kind of adapter do I need for XBee S2C?
Following is the pin configuration of S2C. To configure the XBEE you need an USB XBEE Adapter which can be easily connected to the USB port of your PC. In case you do not have this USB board , you can use your Arduino board as USB-UART.
When is the Zigbee RF module in receive mode?
The XBee ZigBee RF Module is in Receive Mode when it is not transmitting data. The device shifts into the other modes of operation under the following conditions:
What’s the range of a Zigbee S2C router?
Here is the comparison chart of S1 , S2 & S2C .The Indoor/Outdoor range of S2C has also increased much more as the transmit output power is double.Also it works on supply voltage from 2.1v to 3.6v DC. Here are the device types of XBEE :
How to delete second radio on Zigbee S2C?
On the XCTU window delete the second Radio.Click on the first Radio to load the settings. Leaving the XCTU window open, start another instance of XCTU &position it to the left of the previous window. Click on the Search button on the new instance of XCTU & select the second Radio .
What’s the operating frequency of the Zigbee S2C module?
DIGI International has recently introduced the new ZIGBEE S2C Module .The previous S2 & the traditional S1 both are discontinued. The new module is powerful with both UART & SPI communication . Operating frequency band is The industrial, scientific and medical (ISM) radio band ISM 2.4 – 2.5 GHz
How do I transmit data between my XBee modules?
To transmit data wirelessly between your XBee modules, you must configure them to be in the same network. Remember that in Zigbee one device must be the coordinator, and the rest can be routers or end devices. In this case, you will have one router and one end device configured to send data to the coordinator.
What is the role of the Zigbee end device?
The ZigBee coordinator and routers are responsible for discovering and maintaining the routes in a network. A ZigBee end device cannot perform route discovery, and the ZigBee coordinator or a router will perform route discovery on behalf of the end device.
How to change the PAN ID of XBee gateway?
To change the PAN ID of your XBee Gateway: From a web browser, open the Homepage of your XBee GatewayZigBee and go to the XBee Network section from the left menu. Select the local XBee device for XBee Gateway. The XBee Configurationpage appears.