Contents
How do I install a raft in Slic3r?
Open Slic3r. Under Printer Settings in Support Material, enter the value 1.0 in Raft Layers. This value determines how many layers of raft will be printed directly under the model. Under Options for support material and raft, enter the value 2.0 in Interface layers.
How to export Slic3r settings?
If you want to store it you’ll have to go through the Print Settings, Filament Settings and Printer Settings sections and hit the “Save” button for each section you want to create a preset in. The Export Config Bundle… allows to export the entire set of profiles to a single file (not just the selected profiles).
Where does Slic3r store settings?
All other versions
- Windows: “C:\Users\your_user_name\AppData\Roaming\Slic3r” or “C:\Documents and Settings\your_user_name\Application Data\Slic3r”
- Mac: “~/Library/Application Support/Slic3r/”
- Unix / Linux: “~/.Slic3r/”
How do you support a slicer?
To set support material in Slic3r, click on the “Support Material” tab under “Print Settings”, then click the check box to enable it. Leave the “Overhang Threshold” to 0, as Slic3r is pretty good at detecting what areas need supports. Also leave the “Enforce Support for the First” to 0 layers.
How do I export Prusa slicer settings?
RE: Exporting configurations If you go file>export>export config it will save the 3 currently in use. You can then take the resulting ini file to your friends computer and import the config in. They could then just delete the print settings and filament if not needed leaving just the Printer Settings.
Where are Prusa slicer profiles stored?
There are three sub-folders: filament, print, printer. Copy the contents into matching folders in [Drive]:\Users\[PROFILE_NAME]\AppData\Roaming\PrusaSlicer and restart PrusaSlicer. Your profiles should be available now.
How do I change supports in PrusaSlicer?
Another way you can control support enforcement on PrusaSlicer is by choosing one of the options from the “Supports” drop-down box in the Plater tab. Here, you’ll see the basic “Everywhere” and “None” options, but you’ll also see other options, including “Supports on build plate only” and “For support enforcers only”.
Where to get the Slic3r configuration files for the 3D printer?
I have a Creatorbot 3D printer made by 3D PrinterWorks. Their website appears to be down, as well as their Facebook page. To me it appears they are no longer around. I’ve installed Slic3r as 3D PrinterWorks has recommended in the handbook but cannot download the settings for this from the 3D PrinterWorks website, since that is down.
Why do I have problems trying to get Slic3r to?
I recall having to double and triple check Slic3r to make sure that it actually loaded the configuration I spent time crafting and honing. However, it’s obviously been 3-4 years since I last played with this stuff, and this is a very low level feature that should have been fixed at Day 0 or 1.
What does export config bundle do in Slic3r?
The Export Config Bundle… allows to export the entire set of profiles to a single file (not just the selected profiles). This is handy if you want to clone a Slic3r setup from one computer to another, or make a backup.
How do I save a preset in Slic3r?
Note that loading a config file doesn’t store it as a preset automatically, so it will be not remembered the next time you launch Slic3r. If you want to store it you’ll have to go through the Print Settings, Filament Settings and Printer Settings sections and hit the “Save” button for each section you want to create a preset in.