Why is my filament balling up?
Re: PLA “Balling Up” During Print If your threads aren’t sticking, the most common cause is an incorrectly set starting gap, that either has too much space, or too little, which forces the thread to squish out the sides.
Can you use old filament?
Yes, you can print with old 3D filament, but it is necessary to take certain precautions before doing it. First ensure it has been properly dried. Second, be aware of the printing temperature and be careful not to print too high.
What is a ghost printer?
A ghost printer is a deleted printer that keeps appearing and reappearing even though you’ve tried to delete it and then done a server reboot.
Why is filament building up on the nozzle during a print?
There is a huge buildup of the blue PLA right on the nozzle. Before all of this, I never had a buildup like this. Why is this happening, and what can I do to fix this? What brand and size nozzle? Some after market ones are not too good on finish. If you reassembled the hot end, make sure you tightened the nozzle correctly. It should not be flush.
Why does filament balls up on the extruder?
I’ve also spent hours with the wire cleaning the extruder but when I do a feed test, the filament comes out straight for a second then arches and balls up on the extruder. If I try to print the filament comes out slower than it should and starts clicking a few minutes into the print.
Why does filament come out slower than it should?
If I try to print the filament comes out slower than it should and starts clicking a few minutes into the print. With the extruder heated to 215C I’ve removed the extruder assembly and ran a 6 inch length of wire wire from the small tip, through the barrel and out.
Why does my printer filament keep rolling around?
Now, if you are still facing the issue of filament making the loop or curling around the nozzle instead of sticking to the bed, you need to check the adhesion properties. This part is simple: your surface has less adhesion, which is not allowing the filament to stick to the surface, and it is rolling around.