Contents
What is trim zone?
The trim zone is a technical way to refer to the finished size of a product. For example, a standard 4” x 6” postcard is also its trim size. This means in a layout file, the trim lines show you where the product will be cut down to its desired size.
What is type safe area?
This is an area inside the trim. Safe area is a smaller dimension than your final ad size and is important to pay attention to because this is where you should place your most important information within your design. Safe area on many print ads can be as little as . 125” or as large as 1”.
What is safe area in print?
The ‘safe’ area is the area of your artwork where all important text and images are situated. Any elements outside the ‘safe’ area are at risk of being cut into when the printed items are trimmed due to possible variations in the trim position.
What is the area in your document where your content is safe from being cropped or cut during the printing process?
0.25 inches
The “safe zone” for printing text is a minimum of 0.25 inches inside the edge of the document (or cut line). If you want images or other graphics to extend all the way to the very edges of the material, then the best way to do that is for the printer to print larger than what you want and then trim the edges off.
Is trim the same as margin?
Trim – The size that your work will be cut to. Margin – The area around the outer edge of the piece to allow for printer shifting.
What does trim to bleed mean?
Bleed refers to an extra 1/8” (. 125 in) of image or background color that extends beyond the trim area of your printing piece. The project is printed on an oversized sheet that is then cut down to size with the appearance that the image is “bleeding” off the edge of the paper.
What is margin trim?
The margin-trim property allows the container to trim the margins of its children where they adjoin the container’s edges.
What are the differences between bleed, trim and safe area?
Above is an example of a postcard Trillion designed for Twelve Letter Company. This example shows how we send the file for printing. It has a safe area (shown by the magenta rule), trim (shown by the black crop marks and blue rule), and bleed (shown by the red rule), which will be trimmed.
What does trim, bleed and associated safety margins mean?
Safety margins refer to the zone between text and graphics that are not meant to be trimmed. Keep in mind that because of the mechanical tolerances involved in printing, the actual cut can happen anywhere between the bleeds and the safety margin. This is why it is important to keep your text and important images within the safety margins.
How big of a bleed do I need for Inkd?
For upload to Inkd, extend artwork or background colors that are meant to have bleeds at least .125″ past the trim edge. Bleed zones typically range between .1625″ (1/16″) to .25″ (1/4″) depending on the printer and printing method used. For Inkd, please use a .125″ (1/8″) zone at minimum.
When do you cut bleed off an ad?
Bleed is cut off when the publication is trimmed to the final size. Its sole purpose is to make sure your design or image reaches the very edge without leaving any unsightly white edges. Bleed is commonly .0625” – .5” larger than the trim size but it really depends on the ad size and how it will be trimmed.