Which routing protocol can use VLSM?

Which routing protocol can use VLSM?

Routing Information Protocol v2
In order to use VLSM, a network administrator must use a routing protocol that supports it, such as Routing Information Protocol v2 (RIPv2), Open Shortest Path First (OSPF), Intermediate System-to-Intermediate System (IS-IS), Enhanced Interior Gateway Routing Protocol (EIGRP) and Border Gateway Protocol (BGP).

Is VLSM classless?

By definition, classless routing protocols advertise the mask with each advertised route, and classful routing protocols do not.” i.e. RIP-2, EIGRP, or OSPF support VLSM, and are considered classless.

Which routing protocols support VLSM and CIDR concepts?

Classless routing protocols support VLSM and CIDR. IPv6 routing protocols are classless.

What is an example of classless routing protocol?

Examples of classless routing protocols include RIPv2, EIGRP, OSPF, and IS-IS. The preceding section described how classful and classless protocols differ when sending routing updates. Additionally, the router itself can operate either “classfully” or “classlessly” when actually routing data.

What are the main differences between the OSPF and IS IS routing protocols?

What are the main differences between the OSPF and IS-IS routing protocols? OSPF requires an area 0, while IS-IS does not. OSPF is a classful protocol, while IS-IS is a classless protocol. OSPF is a link state protocol, while IS-IS is not.

Is VLSM classful or classless?

Is CIDR and VLSM same?

As explained, VLSM and CIDR are two components of the same mechanism that allows an efficient partitioning of the IP addressing space. All modern networks work this way, and often the terms VLSM and CIDR are interchangeable.

Is Rip a classless routing protocol?

First, RIP version 2 is a classless routing protocol. Classless routing protocols always advertise the subnet mask in their routing updates.

What is classless and classful IP?

Classless addressing and classful addressing refer to two different ways to think about IP addresses. Both terms refer to a perspective on the structure of a subnetted IP address. Classless addressing uses a two-part view of IP addresses, and classful addressing has a three-part view.

What are the main differences between the OSPF and IS-IS routing protocols quizlet?

How are classless routing protocols different from VLSM?

Classless routing protocols allow to use the networks with the different length of subnet masks. Hence, these routing protocols support the CIDR and VLSM. Classful routing protocols do not send periodic update (which means sending the routing updates at the regular time intervals) like classful routing protocols.

What kind of router do I need for VLSM?

VLSM is supported by the following protocols: Open Shortest Path First (OSPF), Enhanced Interior Gateway Router Protocol (EIGRP), Border Gateway Protocol (BGP), Routing Information Protocol (RIP) version 2 and 3, and Intermediate System-to-Intermediate System (IS-IS). You need to configure your router for VLSM with one of those protocols.

Which is of the following are classless routing?

The LAN networks extending from Router A and Router B are derived from the same Class C network, 192.168.1.0/24. A classful routing protocol such as RIP v1 same problem. Whenever networks with non-default subnet masks are used, a classless routing protocol will be required.

What are the differences between flsm and VLSM?

Table 2.0 below is a summary of the differences between FLSM and VLSM Subnetting. VLSM is supported by the following protocols: Open Shortest Path First (OSPF), Enhanced Interior Gateway Router Protocol (EIGRP), Border Gateway Protocol (BGP), Routing Information Protocol (RIP) version 2 and 3, and Intermediate System-to-Intermediate System (IS-IS).