Contents
What is uplink port?
The UPLINK port is a special port that is used to connect the virtual switch to a physical switch — essentially bridging the virtual switch’s simulated network to a physical network. Typically, the UPLINK port is an OSA-Express (or a set of OSA-Express) devices.
What is an MDIX port?
Media Independent Interface (MDI) and Media Independent Interface with Crossover (MDIX) are basically ports on a computer and a network switch, router, or hub, respectively. You can connect to them with the help of RJ-45 connectors and a fiber optic or a twisted pair copper cable.
What is the uplink port on a hub used for?
The uplink port is used to connect a device to other higher-speed ones in the topology or smaller local network to a larger network. For example, the edge switch connects “up” to the distribution layer managed switch.
How do I find my uplink port?
Most modern routers have an uplink port on the back. This port is often labeled “Internet” or has a circle icon that indicates it should connect to an Internet device, such as a cable or DSL modem. On switches, the uplink port is often labeled “Uplink” since it often connects to another switch or router.
What does MDIX stand for?
medium dependent interface crossover
A medium dependent interface crossover (MDIX) is a version of the medium dependent interface (MDI) enabling a connection between corresponding devices.
When should I use Auto-MDIX?
Auto-MDI/MDIX feature allows a switch port to automatically detect what type of port is connected on other end (MDI port or MDIX port) and swap the transmission and receive pins. Thus, the transmission pins on one side may connect with the receive pins on other side.
How is the uplink port used in a network?
The uplink port is used to connect a device to other higher-speed ones in the topology or smaller local network to a larger network. For example, the edge switch connects “up” to the distribution layer managed switch.
Which is the port where transmit and receive are reversed?
An uplink port is a port on which Transmit and Receive are reversed. They are used to connect together 2 switches with a standard straight-trough cable. (otherwise it would require a cross cable where the transmit and receive are crossed in the cable rather than on the switch port)
What’s the difference between a downlink and an uplink?
A downlink is a connection that is made in the opposite direction to an uplink. In the context of home networking, this refers to the communication from an outside network to a local network. It can also refer to the communication from a satellite to the ground, for example.
What does it mean when a switch is auto MDIX?
Nowadays this generally doesn’t matter anymore since most interfaces are “auto-mdix”, meaning that the interface detect the type of device connected and cross transmit and receive internally if needed. (and if the switch itself is not auto-mdix but the device you connect on it is , it also works).