How do routers communicate with one another?
Routers tell each other routes to subnetworks; only the local routers need to be able to send to specific machines (and that’s what MAC addresses and ARP are for). Routers talk to each other about routes via BGP; from time to some, some ISP messes up there and large chunks of the internet cease to work.
How does Azure routing work?
Azure creates a route with an address prefix that corresponds to each address range defined within the address space of a virtual network. If the virtual network address space has multiple address ranges defined, Azure creates an individual route for each address range.
How do I send packets between two IP hosts?
In that case you can send an ARP request and then send the packet to the MAC address you get the reply from and it will arrive at Host 2 – the same way TCP/IP packets are usually sent over Ethernet to hosts on the same network. If you can make out — Both the computers are on different subnets.
How to set up routing between two host-only networks?
Procedure 1 Set up the connection to the first host-only network. 2 Set up the connection to the second host-only network. 3 (Optional) To run the router software on a virtual machine, set up a third virtual machine that has connections to the two host-only networks. 4 Stop the VMware DHCP Server service.
How do I set up a second host only network?
Set up the connection to the second host-only network. Select the virtual machine and select VM > Settings. On the Hardware tab, select Network Adapter. Select Custom and select the custom host-only network from the drop-down menu.
Can you have more than one host only network?
In both cases, you need two host-only networks. In a simple configuration, you configure one virtual machine on each of the host-only networks. For more complex configurations, you can add more virtual machines and host-only networks. Create a second host-only network.
Which is the default router address for a host only network?
If you are running the router on the host computer, assign default router addresses based on the addresses of the host-only adapters on the host computer. In the first virtual machine’s networking configuration, the default router address should be the IP address for the host-only adapter connected to VMnet1.