Contents
Does ping work across VLANs?
The internet router’s LAN interface can ping all other vlans but all other vlan’s can ping any device connected to the LAN interface.
Can a computer be on two VLANs?
Re: Making a PC a member of more than one VLAN “If you need to communicate between your two virtual LANs you need to link them with a router, either one with physically separate interfaces, or one that supports VLANs – this router can also be a “route switch”, or layer 3 switch.”
How do I connect one VLAN to another?
Step-by-Step Instructions
- Enable routing on the switch with the ip routing command.
- Make note of the VLANs that you want to route between.
- Use the show vlan command in order to verify that the VLANs exist in the VLAN database.
- Determine the IP addresses you want to assign to the VLAN interface on the switch.
Is it possible to Ping two VLANs at once?
PROBLEM: All vlans can ping to each other except for vlan 300. Maximum ports are on vlan 100 and some are on other VLANs. Interface 7/1, 7/2 are on vlan 300. Config of 7/1 adn 7/2 is:
How to access multiple VLANs from one PC?
May be I understand your question correctly. You can access any vlan…from 1 pc. All these routing done by layer 3 switchor a router. ! ! ! And on hosts just assign IP addresses and default gateways (to the corresponding interface VLANs) -> hosts in different VLANs can communicate.
Are there any ports on more than one VLAN?
Maximum ports are on vlan 100 and some are on other VLANs. Interface 7/1, 7/2 are on vlan 300. Config of 7/1 adn 7/2 is: I do not have any trunk ports as routing is already there. Any ideas and help is very much appreciated. Solved! Go to Solution. 10-30-2015 07:18 AM 10-30-2015 07:18 AM
Can you allow as many VLANs by command switchport trunk?
You can allow as many vlans by command switchport trunk allowed vlan add 300,100. If you make trunk yes it normally allow all vlans by defaul but genrall practice is to allow only vlans which required to traverse between the switches. 11-02-2015 11:35 AM