Are Cisco and HP console cables the same?

Are Cisco and HP console cables the same?

The Procurve and Cisco console cables are compatible with each other according to this and one of my HP manuals. So, if this cable is an active converter it’ll work. If it’s a passive adaptor it’ll destroy your USB port/device.

How do I connect my HP Procurve Switch to a console port?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.

What tools cables do you need to console to a Cisco router switch?

Cisco routers either have RJ-45-based or DB-25 DCE/DTE console and AUX ports. You can connect either a terminal (DTE) or a modem (DCE) to these ports. In either instance, you need both an RJ-45 cable and an RJ-45-to-DB-25 or RJ-45-to-DB-9 connector.

How do you connect a console port to a switch?

Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.

Are console cables straight through?

All cables are straight through if you insert a network device between two devices of the same kind. When you need to buy a network cable, define the devices that you want to plug each end of the cable into by the DTE/DCE categories.

Do I need a console cable?

What matters most about console cables is the specific nature of the connection. This is not an Ethernet or networking connection. It is a terminal connection, and its purpose is to enable the connected computer to configure the networking device. This is true for older Cisco equipment and brand-new devices.

Which is used as a console cable?

Rollover cable (also known as a Yost cable, Cisco cable, or a Console cable) is a type of null-modem cable that is used to connect a computer terminal to a router’s console port. This cable is typically flat (and has a light blue color) to help distinguish it from other types of network cabling.

How to connect a HP ProCurve 48 p Switch console port?

HP procurve 48 p switch live edit config? Track users’ IT needs, easily, and with only the features you need. What cable are you using? Normally you use a console cable. Was this post helpful? Thanks for your feedback! I am using a flat console cable. Should I use a rollover instead?

What’s the serial number on a HP ProCurve switch?

Launch Putty or any other terminal emulation software, Tick the “Serial” connection type and enter the COM number in the serial line field. Leave the default connection speed of “9600”. The Device information will be displayed such as the Switch Make and Model number.

Can a Cisco and HP switch work together?

In this example we are going to see how we can use Cisco and HP switches together for Vlan trunking. Before we get into details, let me describe the difference in ‘ terms ‘ using both in Cisco and HP.

How to enable privileged mode on HP ProCurve switch?

To gain further privileges and have the capacity to make configuration changes you must enter “Privileged mode”. Type “>Enable” at the prompt and type the “Enable Password” by default the password is blank. You will notice the prompt will change from “>” to a “#” this indicates you are now in privileged mode.