Can you ping a VLAN interface?
The internet router’s LAN interface can ping all other vlans but all other vlan’s can ping any device connected to the LAN interface.
What is Interface VLAN on switch?
A VLAN Interface is a virtual interface that is attached to the physical network port or bond that your VLAN is configured on. The VLAN Interface is used to automatically tag traffic that is routed through it with the appropriate VLAN ID.
What is difference between VLAN and interface VLAN?
Ports can be assigned to the VLAN, and all frames tagged with a VLAN ID of 10 will be forwarded across trunk ports and VLAN 10 access ports. This VLAN does not require an interface configuration to function properly.
Is it possible to Ping the vlan interface?
08-04-2019 08:34 PM This is going to be a beginner level question, however I cannot seem to find the answer anywhere. I have the following (relevant) configuration/status: Very simply, my laptop (10.0.0.3 255.255.255.0) is connected directly to fastethernet0, however I cannot ping the vlan10 interface (10.0.0.10).
Is it possible to use FastEthernet 0 on VLAN 10?
08-05-2019 01:20 AM add switchport mode access in case switch does not converted. and are u sure u want to use FastEthernet 0 ? it is management port on new brand of switches, which u can configure with ip address. so, it may not be reachable to go via interface vlan 10.
Can a trunk port be untagged on a VLAN 5?
Just because port 1 is untagged on vlan 5, doesn’t mean port 2 has to be. It’s completely dependent on the device connected to it. Trunk ports carry multiple vlans. Typically you have the untagged default vlan (usually 1), and then you tag every vlan that needs to cross that trunk.
Do you need an IP address for VLAN 300?
You have no ip address on the SVI for vlan 300. So you need to assign an IP and make that the default gateway for clients in vlan 300. 10-29-2015 07:17 AM