Contents
How to transform the coordinates of a point file?
To transform the coordinates of a point file for example from Gaus-Krueger to ETRS89.UTM, you can create a new Point File Format to use when importing the point file. Open a drawing that has its Coordinate System set to the desired (target) system. Expand Point > Point File Formats.
How to change the orientation of a SolidWorks model?
Re-import the model back into SolidWorks and it will now be in the orientation of the new Coordinate System and any model changes you made to correct bad geometry should carry over to the new part.
How to convert point file from ll84 to ETRS89?
If you want to convert from/to WGS84 (LL84) to/from ETRS89.UTM you want to choose DECDEG-Latitude and DECDEG-Longitude for “decimal degrees”. Tip: Save the new Point File Format in a drawing template (DWT) file for future use.
Do you have to put negative sign in latitude and longitude?
Enter values into the coordinate tool and the values will automatically update. For decimal degrees, remember to include the negative sign for south and west coordinates! Errors will show in red text. Latitude (-90 to 90) and longitude (-180 to 180).
How do you transform a point file into a grid?
Enter a new Format name. Select the Northing column and change the value to Grid Northing. Select the Easting column and change the value to Grid Easting. Select the Coordinate Zone Transform check box, and then click the Globe button to choose the coordinate zone that matches the point file. Click OK.
How to change the format of a point file?
Expand Point > Point File Formats. Select the pre-defined point file format that corresponds to your point file. Right-click the selection. Click Copy. Enter a new Format name. Select the Northing column and change the value to Grid Northing.
How do I assign a coordinate system to a drawing?
You must specify a coordinate system for the current drawing to take advantage of coordinate transformation capabilities. On the status bar, click the down arrow next to Coordinate System and click Library. The control displays your current coordinate system (if any). Click Map Setup tab Coordinate System panel Assign.
Which is the first coordinate in a line?
The first coordinate ( 40,60) is relative to your UCS. start the first point of the line. If you have problem with zooming in or out use REGEN command. The second point of your line will be in ( 40,0) . 40 in the X direction and 0 in the Y direction so the line will be horizontal.
Which is the first coordinate in AutoCAD to draw?
The first coordinate ( 40,60) is relative to your UCS. Just select the line command and type: 40,60 and it will automatically start the first point of the line. If you have problem with zooming in or out use REGEN command.