Should I use same SSID?

Should I use same SSID?

We recommend you to use a different SSID than your main router even if you have the choice to use the same SSID. In short, when you have the same SSID for both the WiFi extender and the router, your mobile devices will almost always stick to the weaker one instead of disconnecting you and switch to the stronger one.

What happens if same SSID?

2 Answers. Two identically named SSIDs with the same password will allow your device to connect to either, without having to add any extra networks on your devices. If both routers are broadcasting from the same location, the expected behaviour will vary depending on device.

Should I have the same SSID for 2.4 and 5Ghz?

Almost all current wireless devices support both 2.4Ghz and 5Ghz frequencies. Older 2.4Ghz only devices will just connect to the 2.4Ghz frequency and not even see the 5Ghz frequency, so having the same SSID will work fine for them.

Can two SSID be the same?

You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.

Should router have same SSID AP?

It is permissible to have multiple AP with the same SSID. This is standard practice in a multi-AP environment. You just need to make sure they are on different channels. You can leave them broadcasting if they are both the exact same SSID, or you can disable the broadcast on the second and follow what Mike said.

Does access point have its own SSID?

Controllers software can also live right on the access point itself. You will be able to assign a single SSID and password to all of your access points instead of having to join different networks every time you move between rooms or floors.

Is SSID and WIFI name the same?

What is an SSID? SSID is short for Service Set Identifier. All wireless networks have an SSID, in everyday speech often known only as network names or Wi-Fi names. You need to know or find this name in order to connect to a wireless network, usually in combination with a password.

Which is better for streaming 2.4 GHz or 5GHz?

Ideally, the 2.4GHz band should be used to connect devices for low bandwidth activities like browsing the Internet. On the other hand, 5GHz is the best option for high-bandwidth devices or activities like gaming and streaming HDTV.

How do I create a separate SSID?

Tech Support

1. From a computer connected by ethernet, open browser\type in the Address Bar 192.168.
2. Click on Wireless Setup.
3. To your left, click on the “Multiple SSID” link.
4. Click the drop down in step ONE and select a name from the list separate from the main network name, (this should be in the box)

Why does my WiFi have 2 SSID?

Most likely, your router has two radios inside it. One operates at 2.4GHz and is using the SSID “ssid-network”. The other operates at 5GHz and is using the SSID “ssid-network-5G”. The 2.4GHz network is supported by more devices and has longer range.

Is it possible to have the same SSID on multiple devices?

As long as your device is connected to Wi-Fi, there’s no problem having multiple networks with the same SSID number within the vicinity. However, if your device disconnects and then tries to reconnect, this can cause some confusion, as it will pick the network with the strongest signal.

Do you use the same pass phrase on both SSIDs?

Personally, I normally use different pass phrases as well as different SSIDs. Many devices, especially with Windows make it easy for the device owner to find the pass phrase. If it is the same on both bands, then they can connect that device (and other devices they may have) to either band.

What does the SSID mean on a router?

The SSID is the name your device sees when it scans the airways for a network. If left in default mode, which you should never do, the SSID usually has the name of your network carrier or router manufacturer. If you change it, the new name will broadcast to any device in range.

What happens if I use the same SSID for 2.4 and 5GHz?

If the SSID’s are the same it will initially connect to 5Ghz at a speed between 500Mb/s and 600Mb/s but within the hour it reverts back to 2.4Ghz. There it gets at best around 130Mb/s but very regularly it degrades to around 70Mb/s and due to interference there is quite a bit of loss.

Can multiple routers have same SSID?

What if 2 WiFi networks have the same name?

If the WiFi network names and/or passwords are different, you will not be able to take advantage of band steering and will need to manually manage which WiFi network band each device connects to. With the same name and password, that process will occur automatically.

How can I extend my WiFi range with the same SSID?

To extend your home network:

1. Connect two access points to the same network.
2. Make sure that there is only 1 DHCP server.
3. Use the same wireless network name (SSID) for both AP’s.
4. Use the same password and encryption settings for both AP’s.
5. Enjoy!

Is it possible to use the same SSID on two routers?

It is also possible to use the same SSID on both routers, so you don’t have to switch depending on where you are in the house. But there are also other benefits of having two routers except for better WiFi. You can expand your network with more ethernet ports in other parts of the house/apartment.

Are there any wireless access points with the same SSID?

We have five AP’s, all with the same SSID and same security settings, but on different channels. As I walk through the building, the wireless device (laptop, tablet, phone) all switch as they need to. Think you’ve mastered IT? Try the Challenge » Datto wifi?! Do they charge a subscription/license fee? Any good?

Can a range extender use the same SSID as the host?

You can either clone the ssid of your host network or you can give the extender a custom ssid. This article will let you know the difference between the two. By cloning the ssid you are setting the range extender to use the same ssid as the host device.

What’s the best way to setup multiple Wifi access points?

A best practice when setting up multiple wireless access points in any situation is to conduct a wireless site survey. The wireless site survey essentially takes all the guesswork out of your WiFi setup and gives you a clear plan of attack on where you should mount your access points.