Contents
How do you interconnect two VLANs?
The simplest way to enable routing between the two VLANs to simply connect an additional port from each VLAN into a Router. The Router doesn’t know that it has two connections to the same switch — nor does it need to. The Router operates like normal when routing packets between two networks.
How do I connect VLAN to another VLAN?
Step-by-Step Instructions
- Enable routing on the switch with the ip routing command.
- Make note of the VLANs that you want to route between.
- Use the show vlan command in order to verify that the VLANs exist in the VLAN database.
- Determine the IP addresses you want to assign to the VLAN interface on the switch.
How to create a VLAN for a SF / SG 200 switch?
SF/SG 200 and SF/SG 300 Series Managed Switches Step 1. Log in to the web configuration utility and choose VLAN Management > Create VLAN. The Create VLAN page opens: Step 2. Click Add. The Add VLAN window appears. There are two ways to create a VLAN. You can create a single VLAN or you can set a range of new VLANs.
How to connect two untagged VLANs from two different switches?
One cable goes from each of the different VLANs on the L2 switches into different VLANs on the L3 switch. As long as STP is disabled this seems to work fine. However, we tried this same scenario on this Cisco Small Business switch and only one of the two untagged VLANs on the Cisco will pass traffic at a time.
How to setup a Cisco SG 300-20 managed switch?
This article will show how to setup a Cisco SG 300-20 switch to work on a home / office network. First of all you need to change your System Mode to Layer 3. To get to the Console, you can either use the provided serial cable and login with the default userid/pw, or by enabling SSH.
How do you set up a VLAN on a switch?
After you create the VLANs, you need to setup the IPv4 Interfaces. Now you want to Untag the Ports that will be included in your first VLAN. Change your VLAN ID to 2 and hit GO. Then under “Interface Settings” you need to change the port to Mode = Access for VLANs to work properly.