Contents
What is static trunk?
Static trunk. The switch uses the links you configure with the Port/Trunk Settings screen in the menu interface or the trunk command in the CLI to create a static port trunk. The switch offers two types of static trunks: LACP and Trunk. Trunk types used in static and dynamic trunk groups.
What is LACP in HP switch?
“lacp” defines lacp as the trunking protocol. Now untag/tag the trunk with VLANs just like any other interface, example: vlan 10 tag trk1.
Is blocked by LACP?
Re: port 7 is Blocked by LACP Basic LACP functionality is that whenever a link comes online, passive LACP will kick in and block the port until it knows if it has an active partner. If it does, it will create a trunk, if not, it will release the port. This most likely is a configuration issue, but not in LACP.
How to configure a switch for a LACP trunk?
To configure the switch to initiate a dynamic LACP trunk with another device, use the interfacecommand in the CLI to set the default LACP option to activeon the ports you want to use for the trunk. For example, the following command sets ports C1 to C4 to LACP active: HP Switch(config) int c1-c4 lacp active .
How to create an EtherChannel in LACP mode?
1 A port in the desirable mode can form an EtherChannel with another port that is in the desirable or auto mode. 2 A port in the auto mode can form an EtherChannel with another port in the desirable mode.
Can a switch port be converted to Trunk Mode?
The device can access, receive and transmit the data via access port. Generally all switchports remains as access ports until we manually convert them to trunk ports. Trunk port mode allow to transmit and receive the data of multiple VLANs. Generally endpoint devices not connected with trunk ports.
How to configure a trunk for another device?
To configure the switch to initiate a dynamic LACP trunk with another device, use the interfacecommand in the CLI to set the default LACP option to activeon the ports you want to use for the trunk. For example, the following command sets ports C1 to C4 to LACP active: