How do I make Cisco ASA access read only?

How do I make Cisco ASA access read only?

Cisco ASA Read-Only User Account

1. Go to Configuration > Device Managment > Users/AAA > AAA Access > Authorization.
2. Click on the button “Set ASDM Defined Roles”
3. Select “Yes” to let ASDM configure the necessary settings.
4. Click on “Apply” to send the configuration on the firewall.

What feature must you configure on a Cisco ASA to allow traffic inbound to a Web server from the Internet?

What tool allows you to configure and view an ASA through a Graphical User Interface? What feature must you configure on a Cisco ASA to allow traffic inbound to a Web Server from the internet (zero security level zone)? To allow traffic inbound to a Web Server, from the internet, access rules must be implemented.

How do I create a Cisco ASA access list?

They can be applied in- or outbound. There are a couple of things you should know about access-lists on the ASA: When you create an ACL statement for outbound traffic (higher to lower security level) then the source IP address is the real address of the host or network (not the NAT translated one).

What is enable_15 user?

The enable_15 user is always present in the User Accounts pane, and represents the default username. This method of configuring the enable password is the only method available in ASDM for the system configuration.

Are standard access lists supported on ASA?

Unlike on other platforms, the ASA does not support the use of standard ACLs for controlling traffic. They are used only in some limited Open Shortest Path First (OSPF) configurations.

How to configure Cisco ASA 5505 for Remote Desktop Access?

In any case, if you are “forced” to implement such a scenario, here is the configuration: Assume that the ASA receives IP address dynamically from the ISP (via DHCP protocol). So the outside IP of the ASA is not fixed. Therefore, we will configure static NAT with port redirection using the outside interface.

Is there a default setting for the ASA VPN?

There is actually a default setting on the ASA that makes it so that ALL traffic coming through a VPN connection bypass your “outside” interface ACL. So currently the ACL rule permitting Site 1 and Site 2 traffic doesnt have any effect as its bypassed.

Is the outside IP of Cisco ASA fixed?

So the outside IP of the ASA is not fixed. Therefore, we will configure static NAT with port redirection using the outside interface. Since the outside address is dynamic, you can use a service such as DynDNS to get a fixed domain name irrespective of the IP mapped with it.

Do you need to assign all users the static IP?

You don’t need to assign all user the static ip, if you wants to restrict 3 users only just assign the ip address to them and remaining will get the ip address for pool accordingly. By this way you don’t need to remove the sysopt connection permit-vpn command on the ASA (which help you to bypass the vpn traffic on the outside interface).