Contents
What kind of interface does Asa 5512-X use?
For the ASA 5512-X through ASA 5555-X, the software module uses the same physical Management 0/0 interface as the ASA. Using Any Interface for Management-Only Traffic You can use any interface as a dedicated management-only interface by configuring it for management traffic, including an EtherChannel interface.
Which is the latest version of Cisco ASA 5505?
You can also use this configuration with the Cisco ASA 5500 Series Version 9.1 (5). Note: The backup interface command is required in order to configure the fourth interface on the ASA 5505 Series. Refer to the backup interface section of the Cisco Security Appliance Command Reference, Version 7.2 for more information.
How to configure ASA for redundant or backup ISP links?
Within the ASDM application, click Configuration, and then click Interfaces. Select GigabitEthernet0/1 from the Interfaces list, and then click Edit . This dialog box appears: Check the Enable Interface check box, and enter the appropriate values in the Interface Name, Security Level, IP Address, and Subnet Mask fields.
How is the ASA connected to the Internet?
In the example that is used in this document, the ASA maintains two connections to the Internet. The first connection is a high speed leased line that is accessed through a router provided by the primary ISP. The second connection is a lower speed Digital Subscriber Line (DSL) that is accessed through a DSL modem provided by the secondary ISP.
How to configure vlan interfaces in ASA 5505?
Step 1 Configure VLAN interfaces. See Configuring VLAN Interfaces, page 11-6. Step 2 Configure and enable switch ports as access ports. See Configuring and Enabling Switch Ports as Access Ports, page 11-7. Step 3 (Optional for Security Plus licenses) Configure and enable switch ports as trunk ports. See Configuring
How to backup and restore Asa 5505 config file?
3) telnet/SSH into the firewall, enber privileged mode, enable logging on your terminal program and enter the following command hit space at the pagination points until you reach the end, save your log, then use a text editor to remove the embedded spaces and save the config as a text file.
How does redundant interface work in Cisco ASA 5500?
The redundant interface uses the MAC address of the first physical interface that you add. If you change the order of the member interfaces in the configuration, then the MAC address changes to match the MAC address of the interface that is now listed first.