Contents
How do I connect two VLANs on the same switch?
The simplest way to enable routing between the two VLANs to simply connect an additional port from each VLAN into a Router. The Router doesn’t know that it has two connections to the same switch — nor does it need to. The Router operates like normal when routing packets between two networks.
How many VLANs can we configure in a switch?
4096 VLANs
A switch supports a maximum of 4096 VLANs, among which VLANs 0 and 4095 are reserved for system use, and VLAN 1 is the default VLAN. Therefore, you can only create VLANs 2 to 4094. You can repeat the vlan command multiple times.
How to connect two untagged VLANs from two different switches?
One cable goes from each of the different VLANs on the L2 switches into different VLANs on the L3 switch. As long as STP is disabled this seems to work fine. However, we tried this same scenario on this Cisco Small Business switch and only one of the two untagged VLANs on the Cisco will pass traffic at a time.
Can a router route between two VLANs?
You can’t route between vlans without something doing the routing for you. The switch can have the vlans on them, but you’d only be able to talk between hosts in the same vlan. To route between, you’ll need to configure the above on your router.
How do I switch from VLAN 1 to VLAN 10?
So we configure vlan 10, connect a utp-cable between vlan 10 and vlan 1 (access-ports, no cdp ena (cisco switches)) then reconfigure all clients from vlan 1 to vlan10, and finaly diable the def gateway ( int vlan 1, no ip addre , int vlan 10, ip address x.x.x.x, no shut) and everything works, and can work during I am doing my switchover.
How are VLANs split up into sub-interfaces?
That method is to create a Sub-Interface. A Sub-Interface allows a single Physical interface to be split up into multiple virtual sub-interfaces, each of which terminate their own VLAN. Sub-interfaces to a Router are similar to what Trunk ports are to a Switch – one link carrying traffic for multiple VLANs.