Contents
What is active flow timeout?
With the active flow timeout of the router, the delay until data arrives at PRTG is the active flow timeout value at maximum, even if the delivery lasts longer. So PRTG could record the received volume in a timelier manner but still at the end of the interval of a separated flow.
How do I configure a flow monitor on a Cisco switch?
To configure NetFlow on a switch you perform the following steps: • Define a flow record by specifying key and non-key fields of interest. Define one or many flow exporters by specifying export format, protocol, destination and other parameters. Define a flow monitor based on the above flow record and flow exporter(s).
How do I configure IP Flow Monitor?
- Step 1: Configure the Records. NetFlow uses key and nonkey values called a record.
- Step 2: Configure the Flow Exporter. The flow exporter exports the NetFlow data to a NetFlow collector.
- Step 3: Configure the Flow Monitor.
- Step 4: Create a Sampler.
- Step 5: Apply NetFlow to Interfaces.
- Step 6: Verification.
What is show ip cache flow?
NetFlow allows us to track these flows on our network. We can use this information to solve problems like bottlenecks, identify what applications are used, how much bandwidth they use etc. For each of the flows, NetFlow will track the number of packets sent, bytes sent, packet sizes and more.
What is IP route cache flow?
The route cache allows outgoing packets to be load-balanced on a per-destination basis. The ip route-cache command with no additional keywords enables fast switching. Our routers generally offer better packet transfer performance when fast switching is enabled, with one exception.
What does IP flow ingress command do?
The command ip flow ingress is issued to ensure that all flows passing through the router can be monitored regardless of direction. Traffic may be monitored in any direction, which makes options B, C, and D incorrect choices.”
How do I configure ip flow top talker?
Configuring NetFlow on a Cisco 6500 Series Switch
- enable.
- configure terminal.
- mls flow {ip | ipv6} {destination | destination-source | full | interface-destination-source | interface-full | source}
- interface type number.
- ip flow {ingress | egress}
- exit.
- Repeat Steps 4 through 6 to enable NetFlow on other interfaces.
- end.
How does NetFlow work on a router?
NetFlow is a network protocol system created by Cisco that collects active IP network traffic as it flows in or out of an interface. The NetFlow data is then analyzed to create a picture of network traffic flow and volume — hence the name: NetFlow.
When to use the active flow Timeout setting?
With the active flow timeout setting, your device divides this flow into small pieces so that not all information of the flow needs to be sent at the end of data delivery. For example, consider a 1-GB download within 60 minutes. This would be one flow with a volume of 1 GB after 60 minutes.
When to use the Flexible NetFlow COLLECT command?
The Flexible NetFlow collect commands are used to configure nonkey fields for the flow monitor record and to enable capturing the values in the fields for the flow created with the record. The values in nonkey fields are added to flows to provide additional information about the traffic in the flows.
How does the flow cache work in Cisco NetFlow?
The entries in the flow cache will be aged out according to the timeout active seconds and timeout inactive seconds settings. This is the default cache type. Configures a permanent cache type. This cache type disables flow removal from the flow cache. The default Flexible NetFlow flow monitor flow cache parameters are used.
Is there a Cisco 7200 Flexible NetFlow command?
Support for this command was added for Cisco 7200 series routers. This command was integrated into Cisco IOS Release 12.2 (33)SRE for the Cisco 7300 Network Processing Engine (NPE) series routers. This command was integrated into Cisco IOS XE Release 3.1S. This command was modified. The event transaction-end keyword was added.