What is line card in Nexus?
–> Cisco Nexus line cards are basically divided into two types: – M series and F series. –> M Series card is basically used for the L3 purpose like routing etc. whereas F series card was originally a Layer2 card. –> New third generation of F-series can support L3 features like MPLS, OTV etc.
What is a nexus 7k?
The Cisco Nexus 7000 Series is a modular data center-class switching system designed for 10 Gigabit Ethernet networks. The Cisco Nexus 7000 Series is purpose-built for the data center and has many unique features and capabilities designed specifically for the most mission-critical place in the network, the data center.
How to check serial number of Nexus 7k?
Displaying the Switch Serial Number The serial number of your Cisco Nexus 7000 Series switch can be obtained by looking at the serial number label on the back of the switch (next to the power supply), or by entering the show sprom backplane 1 command.
How do I find my Nexus serial number?
The serial number of the NeXus-10 MKII can be found on the product information label that is placed in the battery compartment on the backside of the device (not the battery itself). The serial number is the 10-digit number, which is printed behind ‘SN’ and starts with 0938xxxxxx.
How do I find my Nexus model number?
Settings>About Phone>Reglatory Information it has the model number in there.
What kind of software does Cisco Nexus 7000 use?
Each device is shipped with the Cisco NX-OS software. The Cisco NX-OS software consists of two images—the kickstart image and the system image. The software image install procedure is dependent on the following factors:
What kind of routing does a Nexus line card do?
Most of the line cards support layer 2 and layer 3 forwarding. The F1 32-port GE and 10 GE line card module is a layer 2 module and used for access switch connectivity. All Nexus line cards are wire rate non-blocking (no oversubscription) except those noted.
Where is the kickstart file on a Cisco Nexus 7000?
Software images—The kickstart and system image files reside in directories or folders that you can access from the Cisco NX-OS software prompt. Image version—Each image file has a version. Flash disks on the device—The bootflash: resides on the supervisor module and the CompactFlash disk is inserted into the slot0:, usb1, or usb2: device.
Where is the flash disk located on the Nexus 7000?
Image version—Each image file has a version. Flash disks on the device—The bootflash: resides on the supervisor module and the CompactFlash disk is inserted into the slot0:, usb1, or usb2: device. Supervisor modules—There are single or dual supervisor modules.