Contents
How do I copy a running config?
Use the copy system:running-config nvram:startup-config command to copy the running configuration to the startup configuration. Caution Some specific commands might not get saved to NVRAM. You will have to enter these commands again if you reboot the machine.
How do I save copy running config startup config?
The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show running-config command. Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM.
How do I copy and paste a running config in Cisco?
Paste the configuration file into the router by selecting Edit > Paste to Host on the HyperTerminal menu. After the configuration has finished pasting, and the router brings you back to the configuration prompt, issue the copy running-config startup-config command. This writes the configuration into memory.
What is the short command for copy running config startup config?
CCNA Certification/Appendix F – Abbreviated Commands and Keyboard Shortcuts
| Abbreviation | Command |
|---|---|
| run | running-config |
| start | startup-config |
| wr | write (copy running-config startup-config) |
| shipro | show ip route |
How do I copy a running-config to Notepad?
The easiest way to do this is to issue the “terminal length 0” command…then turn on logging in your putty/crt/whatever window….that will save it out to a file. Then issue the “show run” command and it will copy everything even if it is 100 pages long. You will not have to hit the space bar to get to the end either.
How to copy running config on Cisco devices?
The copy command can be used to copy files on a Cisco device, such as a configuration file or a new version of the Cisco IOS. Files can be copied between RAM, NVRAM and a TFTP server. The syntax for the copy commands is as follows: copy {tftp | running-config | startup-config} {tftp | running-config | startup-config}.
How to copy something to a running configuration?
In this lesson, we’ll take a closer look at the copy command when you use it to copy something to the running-configuration. Here’s the current running configuration of a router:
How to run Cisco copy in one line?
6506 (config)#file prompt quiet 6506 (config)#end 6506#copy run tftp://192.168.1.1/file.txt ….. The copy command (at least with Cisco boxes) allows you to specify the username and password all in one line. Something like this: You should be able to use scp or tftp in place of ftp as well.
How do I copy configuration from one router to another?
This is a step-by-step approach to copy a configuration from a router to a TFTP server, and back to another router. Before you proceed with this method, make sure you have a TFTP server on the network to which you have IP connectivity. At the Router> prompt, issue the enable command, and provide the required password when prompted.