How do I backup a Cisco WLC configuration?

How do I backup a Cisco WLC configuration?

1 – Backup config directly from controller GUI

1. Change the IP address to the IP address of your TFTP server and change the File Name to your required backup filename.
2. Your WLC backup will be downloaded to your TFTP server.
3. To enable this click on the task and tick the enable box.

How do you do a packet capture on Cisco WLC?

Enable packet logging in WLC Step 2. Apply an Access Control List (ACL) to limit which traffic is captured. In the given example the capture shows the traffic to/from the WLC’s management interface (IP address 172.16. 0.34) and the RADIUS server (172.16.

What button can be pressed to ensure the changes you make are saved in Nvram in WLC?

y
At the confirmation prompt, press y to save configuration changes to NVRAM.

How do I export switch config?

Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it.

How do I backup my router settings?

To back up the router configuration settings:

1. Launch an Internet browser from a computer or wireless device that is connected to the network.
2. Enter the router user name and password. The user name is admin.
3. Click ADVANCED > Administration > Backup Settings.
4. Click Back Up.
5. Specify a location on your network.

What does Capwap do in a controller based wireless system?

CAPWAP (Control and Provisioning of Wireless Access Points) is a protocol that enables an access controller (AC) to manage a collection of wireless termination points. CAPWAP is defined in RFC 5415. Wireless APs search for a controller by sending discovery request messages.

What is config paging disable?

On a Cisco Wireless LAN Controller: Type “config paging disable” in priviledged mode to set your terminal to display without any breaks.