How are SSIDs assigned on Cisco Aironet Wireless equipment?
When you define multiple SSIDs/VLANs on Cisco Aironet wireless equipment, one (1) SSID can be assigned as guest mode SSID with the SSID broadcast in 802.11 radio beacons. The other SSIDs are not broadcast. The client devices must indicate which SSID to connect.
What are the VLANs on an Aironet access point?
In this example, the VLANs are VLAN 20, VLAN 30, and the native VLAN 2. When you configure the switch port, which connects to the AP and the router, ensure that the native VLANs that you configure match the native VLAN on the AP and the router. Otherwise, frames are dropped.
Can a repeater be mapped to a VLAN?
Repeaters cannot repeat SSIDs mapped to a VLAN. When configuring a root access point and a repeater, make sure that the SSID on the root AP and the same SSID on the repeater use the native VLAN. You can configure other SSIDs on the root AP and the repeater AP that would be mapped to a VLAN, but these tagged SSIDs cannot be repeated.
Can you assign ssid1 to Vlana on radio 0?
If you assign SSID1 to VLANA on radio 0, then you cannot assign SSID2 to VLANA on the same radio 0. You can assign SSID2 to VLANA on radio 1. Alternatively, you can assign SSID2 to VLANB on radio 0 or on radio 1 or on both.
How does a VLAN work with a wireless access point?
When this connection is made, associated wireless client devices that have the same SSID can access the VLAN through the access point. The VLAN processes data to and from the clients the same way that it processes data to and from wired connections.
Can a Cisco Catalyst be connected to a VLAN?
The bridging domain is supported on various pieces of network equipment, such as LAN switches, that operate bridging protocols between them with a separate group for each VLAN. When you connect a device to a Cisco Catalyst switch, the port where the device is connected is a member of VLAN 1.