Contents
How do I find my NFS server address?
Steps. Next, run ‘netstat -an | grep 2049’ to display a list of NFS connections. Look for the connection that matches one of the NFS server IP from nfslookup. This is the NFS server IP that the client is using and will be the IP you need to use for tracing if necessary.
How do I find my NFS kernel server version?
The NFS version will be listed in the second column titled vers. The above output is showing that version 3 of NFS is running on this UNIX host, and that it supports version 2 clients, for tcp and udp. Note: You can also, run nfsstat -m to display statistics for each NFS mounted file.
How do I find my NFS port?
Port 111 (TCP and UDP) and 2049 (TCP and UDP) for the NFS server. There are also ports for Cluster and client status (Port 1110 TCP for the former, and 1110 UDP for the latter) as well as a port for the NFS lock manager (Port 4045 TCP and UDP).
How do I know if NFS is installed?
To verify that NFS is running on each computer:
- AIX® operating systems: Type the following command on each computer: lssrc -g nfs The Status field for NFS processes should indicate active .
- Linux® operating systems: Type the following command on each computer: showmount -e hostname.
What is the default port of the NFS server?
Port 111
Port 111 (TCP and UDP) and 2049 (TCP and UDP) for the NFS server. There are also ports for Cluster and client status (Port 1110 TCP for the former, and 1110 UDP for the latter) as well as a port for the NFS lock manager (Port 4045 TCP and UDP).
What do you need to setup NFS server on Raspberry Pi?
In this guide, we will require the use of the “ nfs-kernel-server ” package. This package builds the foundation of serving files over the NFS protocol from our Raspberry Pi. The “ nfs-kernel-server ” package handles the server side of the NFS protocol and allows us to share drives easily.
Can a Raspberry Pi connect to a NAS?
It is commonly used to connect to a NAS as it is a very well supported protocol. You can even set up your Raspberry Pi to act as an NFS server if you wanted to share files from it. As you will soon see, the steps to set up the NFS client is reasonably straightforward and will only take a few minutes.
How to copy root FS to NFS root?
Instructions to copy the root fs from the SD card to the NFS root export: Mount the root partition of the SD Card Linux install to a directory. In my case I used directory called “old”. Mount the NFS Export for the NFS Root to a directory.
Do you need an IP address for a Raspberry Pi?
You will need to ensure your Pi is connected to network by either setting up the WiFi or using a ethernet cable. We need this IP address so that we can successfully connect to the Raspberry Pi NFS server. 1. To interact with NFS shares on Windows, we need first to enable the NFS client. By default, this feature is disabled on Windows installations.