Contents
How do you make an extruded solid feature?
A sketch and the resulting extruded solid feature are illustrated in the following figure: You can also define the distance over which to extrude by selecting a single face to extrude to. Abaqus/CAE extrudes the sketch until it meets the selected face.
How can I specify the direction of extrusion?
You can specify extrude direction with 2D and with 3D sketches by specifying a direction vector as the Direction of Extrusion. Direction vectors include: Cylindrical faces. Points in reference geometry. Reference planes. Linear edges. Conical faces. Reference axes.
Where does the extruded face start and end?
The extruded face starts from the plane of the profile and ends on a plane perpendicular to the path at the path’s endpoint. One of the endpoints of the path should be on the plane of the profile; if not, the path is moved to the center of the profile.
How to change the shape of a solid object?
You can change the shape of the object by moving its faces. Select faces. Specifies which faces to modify. Removes previously selected faces from the selection set. Remove faces. Removes the selected face from the solid object. Cancels the selection of the faces you added most recently to the selection set and redisplays the prompt.
How does the extrude function work in Autodesk?
Controls whether the extruded object is a solid or a surface. Surfaces are extruded as either NURBS surfaces or procedural surfaces, depending on the SURFACEMODELINGMODE system variable. Extrudes selected objects along the positive or negative Z axis.
Is it possible to extrude a shape to another surface?
Offset From Surface: With this option, it’s possible to extrude a shape until a distance from another surface. Up to Body: You can use this to Extrude a feature to a specific body. This feature is only available when you’ve other bodies on your part.
How is the direction of an extrude determined?
The direction is based on the UCS that was current when the object was created, or (for multiple selections) on the original UCS of the most recently created object. Specifies the length and direction of the extrusion with two specified points.