Contents
What is label direction?
The label roll direction or unwind direction as it is also referred to, is simply the way in which the label unwinds from a roll. It is a simple thing, although it can be confusing if you are not familiar with labels.
What is label unwind direction?
Roll Direction, also called Unwind direction, refers to the way your labels are oriented as you unwind your roll of labels. When applying your labels by machine, the position of your label is extremely important. The labels will need to come off the roll and feed into your machine in a specific position each time.
What is winding direction?
Labels Winding Direction Chart. The label winding refers to the direction that your labels are oriented on the roll. Labels that are ‘wound out’ have the label positioned on the outside of the roll, whereas with those ‘wound in’, the liner is on the outside with the label on the inside.
How do you label Wind?
The label wind refers to the direction that your labels are placed on the roll after being printed and cut to the right size. Labels with an outside wind have the label placed on the outside of the roll, whereas with an inside wind, the liner is on the outside with the label on the inside.
What is rewind number?
Contact Email [email protected]. Phone Number 855-739-4634.
What is an outer wound label?
Wound Out- where the label is facing the outside of the roll and the liner is on the inside. Wound In- where the label is facing the inside of the roll and the liner is on the outside of the roll.
Is wind direction measured from or to?
Wind direction is measured relative to true north (not magnetic north) and is reported from where the wind is blowing. An easterly wind blows from the east or 90 degrees, a southerly from the south or 180 degrees and a westerly from the west or 270 degrees.
How do you tell which way a spring is wound?
Look at the end of the spring to determine the wind direction. If the end of the spring points in the clockwise direction it is left-wound and if the end of the spring points in the counter-clockwise direction, it is right-wound.
What is printer rewind?
The rewind direction is how your label printer will finish the labels on a roll so when you use your labels on your equipment, the labels dispense and apply correctly to your container or bottle. Lucky for you, the label industry has standard rewind directions to help avoid any confusion.
Which way up do coil springs go?
If they are Progressive Rate Coil Springs they will always be installed with the “tighter coils” on the top.. Just remember though.. On your (Front) aftermarket coil springs if one side is ground flat.. The “flat part” of the spring will always be installed pointing up..