Can I forward a port to two IP addresses?

Can I forward a port to two IP addresses?

Can You Port Forward the Same Port # to 2 Different Internal IP Addresses? Yes, you can absolutely do it with UDP and to some degree with TCP. Since UDP is connectionless stateless protocol you can listen for a particular port and once packet arrives you can copy it and send to two different internal destinations.

How do I port forward a local IP?

How to Port Forward

1. Open a web browser.
2. Then type your router’s IP address into the address bar.
3. Next, enter your router’s username and password.
4. Then go to the port forwarding settings on your router.
5. Next, create a new port forwarding rule.
6. Then enter a name for the service or application.

How many ports can you forward?

Only one port forward can exist for every instance of that port. For example, if you forward port 3389 (used by the Remote Desktop remote access program) to a computer with the IP address 192.168.

How to forward one LAN IP address to another?

Yeah just re- point your Port forwarding or NAT on the router from .10 to .176. You could also assign the .10 IP address and the .176 address to the same adapter under TCP/IP advanced settings. http:/ / www.windowsreference.com/ windows-2000/ how-to-addassign-multiple-ip-address-in-vistaxp20002003 Was this post helpful? Thanks for your feedback!

Can a double router forward an IP address?

You have now set up port forwards in your double router network and everything is working without a hitch. That’s great, but if you have not configured static IP addresses for the network devices for which you have forwarded ports then your port forwarding settings are just waiting to break.

How to forward port 80 from one IP to another?

So that, all the packets coming to 192.168.12.87 and port 80 will be forwarded to 192.168.12.77 port 80. How to do this with iptables? Any other ways to achieve the same? These rules should work, assuming that iptables is running on server 192.168.12.87 : You have to DNAT incoming traffic on port 80, but you will also need to SNAT the traffic back.

How to change the port forwarding rule on a router?

(I’m referring to the rule that ‘points the external IP to the internal IP’.) Best thing would be to log into the gateway device, find the port forwarding rule going to “.10”, change it to “.176”, and save – Done. Was this post helpful? Thanks for your feedback! Forwarding (as mentioned above) is more than likely set up on your router.