Contents
How to configure IPv6 on a Debian based system?
You can use 6to4 networking to get an IPv6 network based on your IPv4 address. This will begin 2002: followed by your IPv6 address in HEX. It is possible to configure radvd to derive your IPv6 network block from your IPv4 address. You can use 6in4 to tunnel your IPv6 network to a tunnel broker.
Is there a way to tunnel an IPv6 network?
You can use 6in4 to tunnel your IPv6 network to a tunnel broker. In this case you would get your IPv6 address and network blocks from the tunnel broker. This is your best option if your ISP is not IPv6 ready. If you don’t get your address from your ISP, then your addresses will change when your ISP becomes IPv6 ready.
How to configure radvd to get your IPv6 address?
It is possible to configure radvd to derive your IPv6 network block from your IPv4 address. You can use 6in4 to tunnel your IPv6 network to a tunnel broker. In this case you would get your IPv6 address and network blocks from the tunnel broker. This is your best option if your ISP is not IPv6 ready.
Can you assign your own IPv6 address in Linux?
Debian, Ubuntu, and other Linux distributions have been IPv6 ready for several releases. You can’t assign your own global IPv6 address, just as you can’t assign your own global IPv4 address. You need to get it assigned by your ISP, or IPv6 provider. IPv6 is designed for auto-configuration.
How to setup and configure network bridge in Debian?
Set name server here #dns-nameservers 192.168.2.254 # If you have muliple interfaces such as eth0 and eth1 # bridge_ports eth0 eth1 bridge_ports eno1 bridge_stp off # disable Spanning Tree Protocol bridge_waitport 0 # no delay before a port becomes available bridge_fd 0 # no forwarding delay Save and close the file in vi/vim.
How to enable or disable IPv6 in Linux?
In this case, one way to disable IPv6 would be to add boot option ipv6.disable=1to the kernel command line (in /etc/default/grub) but you said you’ve already checked for that. IPv6 compiled as a module Please run modprobe -c |grep “options ipv6″as root.