How do I see network errors in AIX?

How do I see network errors in AIX?

Example 2

1. Run the following command to see specific statistics for en4: netstat -v ent4 | grep -p “Specific Statistics”
2. Run the following commands to check the No Receive Pool Buffer Errors after 30 seconds: sleep 30 ; netstat -v ent4 | grep “Receive Pool Buffer Errors”

How do I add a network interface in AIX?

Adding a network interface to an AIX VM

1. After you toggle a public network off and then on, look up the list of networks and write down the public network VLAN ID.
2. Use the lsdev -Cc adapter command to generate the list of adapters.
3. Use either the ifconfig -a or netstat -in command to see all of the network interfaces.

How do I find the IP address of AIX?

Use the ifconfig command on all network interfaces to detect bad IP addresses, incorrect subnet masks, and improper broadcast addresses. Scan the /var/hacmp/log/hacmp. out file to confirm that the /etc/rc.net script has run successfully. Look for a zero exit status.

How do I find my MTU size in AIX?

How do I Set MTU to 9000 under AIX operating systems? Next, hit F3 key (or [esc]+3) and come back to the System management main menu. Go to TCP/IP item. Find MTU and set it to 9000.

How do I find my network card in AIX?

On AIX systems, the command ifconfig supports an option (-a) to list all of the interfaces on the machine. The output of ifconfig -a varies among operating systems, but should include the IP address of any Network Interface Card (NIC) on the machine.

How can I permanently change my IP address in AIX?

To configure/change the IP address you must be logged as a root user. When prompted chose the Network interface you plan to use. After you fill in the fields with the network information that you have collected, hit ENTER. The tool runs the mktcpip command in the background and makes the network available.

How do you check if jumbo frames are enabled AIX?

You need to go to Devices > Communication > Ethernet Adapter > Adapter > Change / Show Characteristics of an Ethernet Adapter > Select the interface in question from the list (such as ent1 or ent2). Make sure you enable jumbo frames.