What does 72 mean on a chainsaw chain?

3/8 pitch
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.

What do the numbers mean on a Stihl chain?

The chain tells us it is made by Stihl. The number 6 on the cutter tells us the pitch is 3/8 lo pro or (picco) and the number 3 on the drive link indicates a gauge of . 050″ (or 1.3mm).

How do you read a chainsaw chain?

Pitch= the distance between 3 links divided by 2.
Chains come in 1/4″, . 325″, 3/8″, 3/8″ low-profile, and .
The most common pitch size for chainsaw chains is 3/8″.
The pitch measurement is often displayed on the saw or in the user manual.
When not displayed, it is best to have chain pitch measured professionally.

What do the numbers mean on chainsaw chains?

The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What does MS stand for on a Stihl chainsaw?

Motorsäge
What does MS mean? We’ll start with an easy one. Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.

Can I put a 20 inch bar on a 16 inch chainsaw?

Generally speaking, the higher the power of a chainsaw, the longer the guide bar it can handle….Bar length based on chainsaw power.

Engine Type	Power Rating	Compatible Bars
Gas	25 – 35 CC	12 – 16 Inches
Gas	35 – 45 CC	12 – 18 Inches
Gas	45 – 60 CC	16 – 20 Inches

What’s the difference between chainsaw chains?

Both styles of chain have fewer cutters than standard chain; semi skip chain has more cutters than full skip chain. With fewer cutters tearing through the wood, full-skip and semi-skip chain experience less drag and can cut quickly. They work well with low-power saws or saws with extremely long bars.

What does the pitch of a chain mean?

Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two.

What is a good thickness for a chain?

Try to choose chain that fits your size. If you are a slim guy, then slim chains between 2 mm and 4 mm will fit you well. If you have a large size and thick neck, wider chains may look more proportional. We have a selection of men’s sterling silver chains from 1 mm to 8 mm wide.

What size is 40 chain?

Single-Strand Roller Chain Size Chart

Chain Size	Pitch (P)	Weight (Per Ft)
#40-1	0.500″	0.42 LBS
#41-1	0.500″	0.28 LBS
#50-1	0.625″	0.68 LBS

What do chainsaw numbers mean?

What do the numbers on a chainsaw chain mean?

What to use to make a number chain?

Number Chain Materials: 1 10 toilet paper tubes (or cut 3-4 paper towel tubes) 2 Assorted colors of craft paint and paintbrushes (affiliate link) 3 Marker 4 Standard hole puncher (affiliate link) 5 Plastic straws More

How many numbers are on a number pendant?

Every number pendant includes a stainless steel chain necklace. You can choose from the following lengths: 18″ 20″ 22″ 24″ 26″ We offer all numbers from 00 – 99!

Where to find the drive links number on a chainsaw?

Every chainsaw chain bears this drive links number on its body. Drive links number is found on the guide bar of a chainsaw chain. It is also mentioned in almost every user manual. Don’t worry if you do not find it on the guide bar and are unwilling to go for the reading manual.

What does 72 mean on a chainsaw chain?