Contents
How do I access my LaCie network drive?
Just open a browser to http://server_ip_address (the server_ip_address stands for the IP address assigned to your LaCie Ethernet Disk by the LaCie Network Configurator). Once the page has loaded, you can choose how you want to connect to the LaCie Ethernet Disk.
How do I reset my LaCie Network Space 2?
Follow the procedure below to reset the Network Space to factory defaults:
- Move the power switch to the OFF position. Wait for the drive to shut down.
- Turn ON the drive.
- Within about 3 seconds, flip the switch OFF again.
- Immediately turn it ON.
Where is LaCie NAS on network?
To access the LaCie Ethernet Disk using Microsoft Windows, look in My Network Places. By default, the LaCie Ethernet Disk will be named LACIE-XXXXXXXXX * under Workgroup. When you attempt to access a share, you will be asked to enter a username and a password.
What is LaCie shared?
LSA assists you creating a single or two partitions: a LaCie Share partition that allow to be used in macOS and Windows and LaCie a second partition formatted for your operating system (NTFS for Windows or HFS+ for Mac). The drive just needs to be formatted. Warning: Formatting erases everything on the storage device!
Why can’t I see my LaCie drive?
Disconnect the interface cable, wait 10 seconds and then re-connect. Only use certified interface cables, such as the cables provided with your LaCie drive. If you have followed all of these steps and the drive is still not recognized, shut down your computer, wait 3 to 5 minutes, restart your computer and try again.
In the search results, double-click Disk Management. From the list of storage devices in the middle of the Disk Management window, locate your LaCie device. The partition must be available to format. If it is currently formatted, right click on the partition and then choose Delete.