What are the departure procedures for an airport?
Where an obstacle departure procedure ( ODP) has been published for a location and pilot compliance is necessary to ensure separation, include the procedure as part of the ATC clearance. “Depart via the (airport name) (runway number) departure procedure.” “Depart via the (graphic ODP name) obstacle departure procedure.”
Are there any flight delays at the airport?
Departures are experiencing taxi delays of 16 to 45 minutes and/or arrivals are experiencing airborne holding delays of 16 to 45 minutes. Traffic destined to this airport is being delayed at its departure point. Check your departure airport to see if your flight may be affected.
What are the FAA standard terminal arrival procedures?
AIM, Para 5-4-1, Standard Terminal Arrival ( STAR) Procedures. Issue holding instructions, EFC, and additional delay information as required. Instructions regarding further communications as appropriate. FAA Order JO 7110.65, Para 2-1-17, Radio Communications.
When to withhold landing clearance to arrival aircraft?
ATC will normally withhold landing clearance to arrival aircraft when another aircraft is in position and holding on the runway. Never land on a runway that is occupied by another aircraft, even if a landing clearance was issued. Do not hesitate to ask the controller about the traffic on the runway and be prepared to execute a go-around.
What should I know about FAA Aeronautical charts?
This Chart Users’ Guide is an introduction to the Federal Aviation Administration’s ( FAA) aeronautical charts and publications. It is useful to new pilots as a learning aid, and to experienced pilots as a quick reference guide.
What are the IFR takeoff minimums and obstacle departure procedures?
IFR takeoff minimums and obstacle departure procedures are prescribed for specific airports/runways and published in either a textual, or graphic form with the label ( OBSTACLE) in the procedure title, and documented on an appropriate FAA Form 8260.
When to include departure procedure in ATC clearance?
Where an obstacle departure procedure (ODP) has been published for a location and pilot compliance is necessary to ensure separation, include the procedure as part of the ATC clearance. EXAMPLE- “Depart via the (airport name)(runway number) departure procedure.”