What does the pilot say before takeoff?
There is an announcement like: “Flight attendants, prepare for take-off please.” “Cabin crew, please take your seats for take-off.” Within a minute after take-off, an announcement might be made reminding passengers to keep their seat belts fastened.
What does it mean to hold short of a runway?
Hold short means to stay off the runway if aircraft are inbound and about to land or lined up for takeoff / taking off. You hold short behind the so called hold-short-line.
What is a hold short line?
This painted marking indicates the edge of the ILS critical area. Ground control may ask you to hold short at this line if an aircraft is using the ILS. This sign alerts you that you are approaching a runway and, on a taxiway, is. accompanied by a runway holding position marking.
What does a pilot observe from the runway?
What a pilot would observe: A pilot at or approaching the hold line to a runway will observe Runway Entrance Lights illuminating and extinguishing in reaction to an aircraft or vehicle operating on the runway, or an arriving aircraft operating less than 1 mile from the runway threshold.
What are runway entrance and Takeoff Hold Lights?
Runway Entrance Lights and Takeoff Hold Lights are in-pavement light fixtures that are directly visible to pilots and surface vehicle operators. Runway Status Lights is an independent safety enhancement that does not substitute for an Air Traffic Control clearance.
What do the hold marks on the runway mean?
Holding Position Markings At controlled airports, hold marks on taxiways indicate the position where an aircraft most stop when NOT cleared to cross or enter the runway for takeoff, or the position to stop and wait for other aircraft to take off or land at an uncontrolled airport. Other Facts About Hold Markings
When to cross the holding position marking at an airport?
Pilots approaching runways at airports without an operating control tower must ensure adequate separation from other aircraft, vehicles, and pedestrians prior to crossing the holding position markings. An aircraft exiting a runway is not clear of the runway until all parts of the aircraft have crossed the applicable holding position marking.