What is the minimum separation between the aircraft?
5 nautical miles
Horizontal Separation When flying horizontally, aircraft flying en route, usually within higher altitude airspaces are kept separated by a minimum of 5 nautical miles. The ATCO controls heading, altitude and speed of aircraft to maintain this separation.
How far is the minimum horizontal separation?
In controlled airspace, the required minimum horizontal separation between aircraft flying at the same altitude is five nautical miles, which is just over 9 kilometres. When an airplane is departing, Air Traffic Controllers can place aircraft much closer to each other than they do at cruise altitude.
What is the minimum vertical separation between aircraft?
Reduced vertical separation minima (RVSM) is the reduction, from 2,000 feet to 1,000 feet, of the standard vertical separation required between aircraft flying between flight level 290 (29,000 ft) and flight level 410 (41,000 ft).
What wake turbulence separation in miles is required for a small following a heavy?
The requirement is that a minimum of 5 nm shall be maintained between a Heavy (including A380-800) and any lower category aircraft which is following or crossing behind at the same level or less than 1000 ft below. No special longitudinal wake turbulence separations based on time are required.
When do you apply a minimum separation minimum?
A separation minimum shall be applied between a MEDIUM or LIGHT departing aircraft behind a HEAVY arriving aircraft when operating on a runway with a displaced landing threshold:
How many miles of separation do you need for radar?
When radar is employed in the separation of aircraft at the same altitude, a minimum of 3 miles separation is provided between aircraft operating within 40 miles of the radar antenna site, and 5 miles between aircraft operating beyond 40 miles from the antenna site These minima may be increased or decreased in certain situations
Is there an increase in separation after landing?
No increased separation beyond standard same-runway separation (lead aircraft must be clear of runway if landing, or 6000 feet down the runway and airborne if departing). Small is landing behind landing super, crossing runway.
What’s the minimum separation between a Super and a small plane?
The ATC rules in FAA-land say that if a “small” aircraft (maximum takeoff weight up to 12,500 lbs) is operating under instrument flight rules behind a “super” aircraft (A380 or An225) and less than 1000 feet below it, the minimum radar separation is eight miles between the super ahead and the small behind.