Contents
Who guides planes when taking off landing?
Air Traffic Control System Command Center (ATCSCC) – The ATCSCC oversees all air traffic control. It also manages air traffic control within centers where there are problems (bad weather, traffic overloads, inoperative runways). Air route traffic control centers (ARTCC) – There is one ARTCC for each center.
What do you call the pilot of a plane?
An aircraft pilot or aviator is a person who controls the flight of an aircraft by operating its directional flight controls. Some other aircrew members, such as navigators or flight engineers, are also considered aviators, because they are involved in operating the aircraft’s navigation and engine systems.
What is the primary role of the pilot in command during a flight?
Pilot Responsibility and Authority The pilot-in-command of an aircraft is directly responsible for and is the final authority as to the operation of that aircraft.
What do you need to know about the takeoff procedure?
The takeoff roll or ground roll is the portion of the takeoff procedure during which the airplane is accelerated from a standstill to an airspeed that provides sufficient lift for it to become airborne. After he has lined up the aircraft with the runway in use, the pilot generally accelerates to full power.
How does a pilot prepare for a takeoff?
After he has lined up the aircraft with the runway in use, the pilot generally accelerates to full power. The aircraft will try to leave the ground as its speed increases, but the pilot holds it on the ground until it reaches the optimum speed for takeoff.
What’s the procedure for taking control of an airplane?
Editor’s note: Following the incident this month in which a Horizon Airlines ground worker commandeered and crashed a commercial airplane from Seattle-Tacoma International Airport, we asked former airline pilot John Cox to outline the regular procedure by which a flight crew takes control of an airplane and prepares for takeoff:
What is the captain’s procedure for starting an airplane?
The local controller gives clearance, plus the wind direction and velocity. The captain aligns the airplane with the centerline of the runway as the before-takeoff checklist is completed. Thrusting levers forward to the takeoff setting, or engaging the autothrust, the airplane begins to accelerate.