Contents
- 1 Can current flow from collector to base?
- 2 What is the collector current of the BJT when the base resistor is open?
- 3 Why is Collector current negative?
- 4 What does current flow in acid?
- 5 What’s the difference between base current and collector current?
- 6 When does the collector current increase in a BJT?
Can current flow from collector to base?
Current also flows from base to collector. Hopefully, that is also straightforward. In both cases, current is flowing across a forward biased junction when the transistor is in saturation. Due to transistor action, current also flows from collector to emitter.
What is the collector current of the BJT when the base resistor is open?
The operating voltage is nothing but the base emitter voltage. 04․ If the base resistor is open, what is the collect current? 0 mA.
Does current flow through bases?
Explanation: Bases are also electrolytes which give ions in aqueous solutions and these ions help to conduct electricity. But better use Strong Base as it gives ions easily rather than weak base ; thus strong base conduct electricity easily than weaker base. Only if they’re in aqueous solution (i.e. ionized).
Why is Collector current negative?
With a PNP transistor, conventional current flows out of the collector so Spice might show negative current to indicate direction. With NPN, current will flow into the collector. Remember all polarities are reversed between NPN and PNP transistors.
What does current flow in acid?
Acids undergo dissociation in aqueous solution to form H+ ions. When electricity is passed through an aqueous solution of an acid, the H+ ions reach the cathode and each H+ ion picks up one electron from the cathode to form H2 gas. Because of this reaction, an aqueous solution of acid conducts electricity.
How is current flow in a BJT transistor explained?
I relate this concept to the transistor (BJT) in that current flow can be explained as majority carriers are injected into the base from emitter, these essentially become minority carriers in base and flow to the collector crossing the reversed bias junction. So the Question basically is :
What’s the difference between base current and collector current?
Now, the base current is the sum of the 2 transistors base current, but the collector current, is the difference of the 2 transistors collector current. As a result, when both the forward and reverse transistor conduct, increasing base current leads to more conduction of the reverse transistor, and the collector current does not increase any more.
When does the collector current increase in a BJT?
The collector current is extremely small until V IN reaches approximately 0.6 V. After that, the transistor is in forward active mode, and collector current increases rapidly. Then, at V IN ≈ 1.05 V, the collector current reaches the point at which the voltage dropped across R C is large enough to move the BC junction into the forward-bias region.
What causes current to flow from collector to emitter?
If the voltage at the cathode is higher than the base, this flow of current through the base-emitter junction will cause current to flow from collector to emitter. However in your case, the collector is not at a higher potential than the base, it is at a lower potential.