Contents
How much power can an SMA connector handle?
Connector Specifications
| Connector Type | Maximum Frequency (GHz) | Maximum CW Power @ Max, Frequency (Watts) |
|---|---|---|
| 3.5mm | 34 | 45 |
| SMA precision | 26.5 | 70 |
| BNC | 4 | 70 |
What are the frequency connectors?
High frequency connectors are precision connectors used for test and measurement or for sensitive low loss, phase stable, high frequency microwave applications up to 67 GHz. They are made of high grade materials in order to allow for longer life cycle and higher durability.
What are SMA connectors used for?
SMA and RP-SMA are standard threaded antenna connectors for high frequency applications from 1 GHz to approx. 16 Ghz. They are most commonly used in microwave systems, such as portable radio and mobile phone antennas, but also with WiFi antenna systems.
How much power can an connector handle?
While they are capable of handling 80-100 Watts average power up to 1GHz, they typically do not have a maximum power rating but carry a maximum voltage rating of about 500V.
What is the impedance of the SMA connector?
The connector has a 50 Ω impedance. SMA was originally designed for use from DC (0 Hz) to 12 GHz, however this has been extended over time and variants are available to 18 GHz and 26.5 GHz. There are also mechanically compatible connectors such as the K-connector which operate up to 40 GHz.
Is the RP-SMA connector a male or female connector?
A male RP-SMA connector is the opposite in both respects – male connector body (inside threads) with a female inner sleeve contact Reverse-polarity SMA (RP-SMA or RSMA) is a variation of the SMA connector specification that reverses the gender of the interface, as shown in Figures 1 and 2.
Can a Type F connector be mated with a SMA connector?
Type F cannot be mated with SMA connectors without the use of an adapter. The SMA name is also used for a superficially similar optical fiber connector . The interface dimensions for SMA connectors are listed in MIL-STD-348. The SMA connector employs a 1/4-inch diameter, 36-thread-per-inch threaded barrel.
Which is the reverse polarity SMA connector specification?
Reverse-polarity SMA (RP-SMA or RSMA) is a variation of the SMA connector specification that reverses the gender of the interface, as shown in Figures 1 and 2.