Contents
What kind of Discovery Board does STM32F407 have?
STM32F407 Discovery board (STM32F407G-DISC1) with STM32F4DIS-BB base board and STMF4DIS-LCD display module. The following article explains all necessary steps to create an Embedded Wizard UI application suitable for the STM32F407 Discovery board.
Where can I find STM32F407 source code?
•\\Drivers – This folder contains some touch drivers (XPT2046 and STMPE811) and a set of display drivers (ILI9325, ILI9341, SSD1963 and SSD2119) that can be used as templates for your own hardware. Feel free to use them and to adapt them according your needs. •\\ThirdParty – This folder contains third-party source codes and tools:
How many external interrupts does the STM32F4 have?
Each STM32F4 device has 23 external interrupt or event sources. They are split into 2 sections. First interrupt section is for external pins (P0 to P15) on each port, and other section is for other events, like RTC interrupt, Ethernet interrupt, USB interrupt and so on. October 1, 2014: Added external interrupts library.
How are PA0 and pb0 connected in STM32F4?
PA0 and PB0 and PC0 and so on, are connected to Line0, so you can use only one pin at one time to handle interrupt from there. PA0 and PA5 are connected to different lines, they can be used at the same time. Each line can trigger an interrupt on rising, falling or rising_falling enge on signal.
What kind of power input does the STM32F4 have?
Power Input: The STM32F4 has multiple power pins are all pins can be used any 5-V power supply to power up the device. The power-up the whole device only pins can be used, power input through USB won’t be able to activate all modules of the device. All Power input pin is given below:
Where can I get STM32F407 for free?
If you want to use the Free edition of Embedded Wizard Studio and the STM32 Platform Package, please register on our website and select the target STM32F407 Discovery. Then you can download the above software packages. All customers who licensed Embedded Wizard can visit our download center to get the above software packages.
What is the RESET pin on the STM32F4?
RESET: STM32F4 also has a reset pin in header P1 which can be used externally to reset the device by giving a pulse: NRST – Pin6 BOOT: In STM32F4 there are two different boot pins, Boot0 and Boot1. Both pins are used to select the boot space.