Contents
Which is the RTC clock source in stm32l?
The problem is while configuring Real Time clock I have to set the secondary clock LSE as the RTC Clock source, which in my case my source clock is HSI. Rest of the steps which includes enable PWR controller, enable rtc domain access, rtc clock source, rtc_init (), then settime and gettime, are alright as per I know.
Can a internal crystal be used for RTC clock?
Rest of the steps which includes enable PWR controller, enable rtc domain access, rtc clock source, rtc_init (), then settime and gettime, are alright as per I know. Here is the code I tried –> LSE can only work with External Crystal or oscillator. For internal crystal LSI can be used.
Can a VBAT pin be reset in RTC peripheral?
RTC peripheral has also backup register support, which means that when you reset MCU, registers are not reset or if power is off and you have battery connected on Vbat pin, clock is still working. RTC can also wakeup MCU from all powerdown modes.
What should RTC time be on power up?
On power on, you have to initialize RTC peripheral. This function enables clock for RTC, synchronize registers and prepare RTC to work. RTC is set to 01.01.01 00:00:00 on power up, if it is not configured before. If time is configured and reset happen, time should stay as it was before reset.
How to set time and date in RTC?
We do this by first writing values to two variables we are using sTime1 and sDate1 and then write to clock registers: Here we are setting time and date to 10.10
How does reading RTC current time lock values?
* Reading RTC current time locks the values in calendar shadow registers until current date is read. This is written as a note in their documentation as well as in the source code of the RTC HAL driver.
What is the systick configuration on the STM32?
Basic systick configuration on the STM32. The ARM cortex M4 and M3 processors all come with a systick timer that is part of the core. The other variants, such as the M0 may not have one. This timer is very useful for producing the main system event clock.
Is the ticks variable volatile on STM32 Micromouse?
Note that the ticks variable is declared as volatile so that there should be no problems with it being modified while being used elsewhere in the code. An unsigned 32 bit counter incremented every millisecond will not overflow for about 50 days.
When to use hsi16 or MSI clock signal?
The HSI16 signal can also be used as a backup source (Auxiliary clock) if the HSE crystal oscillator fails. Refer to reference manual section: Clock security system (CSS). The MSI clock signal is generated from an internal RC oscillator.