What is the equivalent resistance of the following circuit?
Answer: The equivalent resistance is 6 Ω
What is the other name of effective resistance?
Effective resistance is another name given to the impedance. Impedance is a property, which changes with the frequency of the signal. Equivalent resistance is defined to a set of resistors or components having resistance only. The effective resistance can be defined to each component of a circuit.
Which can you add to find the equivalent resistance?
The equivalent resistance is the algebraic sum of the resistances (Equation 10.3. 2): RS=R1+R2+R3+R4+R5=20Ω+20Ω+20Ω+20Ω+10Ω=90Ω. The current through the circuit is the same for each resistor in a series circuit and is equal to the applied voltage divided by the equivalent resistance: I=VRS=9V90Ω=0.1A.
How do you find the equivalent resistance example?
The equivalent resistance of a number of resistors connected in parallel can be computed using the reciprocal of the resistance i.e. \frac{1} {R}. The reciprocal of the equivalent resistance will be equal to the sum of the reciprocals of each resistance. The unit of resistance is the Ohm i.e. \Omega.
How do I find the equivalent resistance?
Equivalent resistance can be found if you know the individual resistance values and the source voltage. By calculating each branch current, adding the branch currents to calculate total current, and dividing the source voltage by the total current, the total can be found.
What is the formula for equivalent resistance?
The equivalent resistance of a parallel circuit is found by the general equation Req = 1 / ( 1/R1 + 1/R2 + … 1/Rn) The total power consumed in a parallel circuit is equal to the sum of the power consumed by the individual resistors.
What are the methods of determining Thevenin resistance?
The different methods of finding Thevenin’s Resistance or internal impedance are as follows: For Independent Sources – The most common method of finding the equivalent Thevenin’s Resistance (R TH) or the internal impedance of any linear, bilateral network containing independent current or voltage source is to deactivate the source by its internal resistance .
What is the equivalent resistance through the entire circuit?
The equivalent resistance is defined as a point where the total resistance is measured in a parallel or series circuit (in either the whole circuit or in a part of the circuit). The equivalent resistance is defined between two terminals or nodes of the network.