Contents
What is the RS-485 protocol?
RS-485 is an industrial specification that defines the electrical interface and physical layer for point-to-point communication of electrical devices. The RS-485 standard allows for long cabling distances in electrically noisy environments and can support multiple devices on the same bus.
What is difference between Modbus and RS-485?
Is Modbus the same as RS485? The answer is no, because both of these are relative concepts that need each other in order to fulfil their purposes. Modbus defines the protocol type and RS485 defines the signal level on the protocol.
What can you do with RS232 to RS485 converter?
The RS232 to RS485 converter can be used for point-to-point connections (connecting one RS232 to RS485 converter directly to another RS232 to RS485 converter) and point-to-multipoint networks (connecting one RS232 to RS485 converter to multiple RS232…
How long can a RS485 wire be used?
RS-485 allows multiple devices (up to 32) to communicate at half-duplex on a single pair of wires, plus a ground wire (more on that later), at distances up to 1200 meters (4000 feet). Both the length of the network and the number of nodes can easily be extended using a variety of repeater products on the market.
How is the address assigned to a RS485 adapter?
These addresses are usually assigned and controlled by software, either the software running at the RS485 master (PC), or software programmed in each of the slaves. Sometimes the equipment connected at the RS485 slaves is addressable by hardware instead of software.
Which is the control line for a RS-485 device?
Some RS-485 hardware handles this automatically. In other cases, the 485 device software must use a control line to handle the driver. (If your 485 device is controlled through an RS-232 serial port, this is typically done with the RTS handshake line.)