How do I program XBee s2c?

How do I program XBee s2c?

How to configure ZigBee/Xbee Pro

1. XBee connection with USB adapter. Place the XBee module on XBee USB adapter:
2. Download and Install XCTU software 6.1.
3. Now configure the first radio as COORDINATOR.
4. Now click on the second radio and configure this as ROUTER.
5. Communication between Coordinator and Router.
6. Check the Output.

How do I connect XBee module to Arduino?

Just hook up the XBee module to the Explorer board and plug it with the laptop using USB cable. If you don’t have any converter or explorer board, then an Arduino board can be used as a USB to serial device which can easily communicate with the XBee and laptop.

How do I make two XBee communicate?

A simple test can be done to be sure the two XBees are communicating properly. You can connect either one of the XBees to the computer. Then, connect the second XBee to 3.3V power and connect the Dout and Din pins together. This will cause the XBee to automatically retransmit any data it receives.

How do I connect XBee modules?

Connect two XBee modules to your computer using the USB cables….Optional: Add a radio module

1. Click the Add a radio module specifying the port settings button .
2. In the Add radio device dialog, select the COM port for the device you want to add.
3. Click Finish.

What is XBee S2C?

XBee S2C is a RF module designed for wireless communication or data exchange and it works on ZigBee mesh communication protocols that sit on top of IEEE 802.15. 4 PHY. The module provides wireless connectivity to end-point devices in any ZigBee mesh networks including devices from other vendors.

What is the use of XBee module?

XBee – According to Digi “XBee modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15. 4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

How do I connect two ZigBee devices?

The other device act as Zigbee Router. Connect the Xbee module configured as router in its circuit. The Xbee module is connected to the Arduino in the similar manner. An LED is interfaced with the Arduino at its PD2 (pin 4) pin through a pull up resistor of 220 ohms.

What is XBee module used for?

What is the use of XCTU software?

XCTU is a free multi-platform application designed to enable developers to interact with Digi RF modules through a simple-to-use graphical interface. It includes new tools that make it easy to set-up, configure and test XBee® RF modules.

How to configure my XBee S2C modules for?

I have two xbee module (fixed on a development board), these boards does not have a individual access pins to access xbee pins (photo included), but rather a RS232 port. As for what I have searched, there are two ways to configure your xbee for communication.

How can I connect my XBee module to my Arduino?

Download the XCTU software from this link and install it. After downloading and installing the XCTU software, open it and make sure your XBee module is properly connected. Check the COM port of the Arduino board in device manager.

Where do I find XBee on my computer?

Available for both Windows and Mac. Plug your first XBee into an Explorer module, and connect to your computer’s USB port via a USB cable. Open XCTU and click “Discover devices.” Select the port to be scanned. Then on the next page, select the settings as shown below. Click “Finish.” Your device should appear on the “Devices discovered” list.

How does XBee communicate with other smart devices?

XBee devices use the serial interface to communicate with various smart devices. The data from serial input is transmitted wirelessly and the received wireless data can be read through the serial output.