Contents
Which is differential ADC with positive and negative inputs?
MCP3423 is differential ADC with positive and negative inputs for each port. I am looking to connect negative (-) port to gnd, so I feed the voltage to the positive input.
How is differential ADC used in a potentiometer?
As the name suggests, a differential ADC is used to measure the difference between two signals. For a simple potentiometer, there isn’t really two different signals to measure, so you’re measuring the difference between the wiper and ground.
What is the range of mcp3423 differential ADC?
MCP3423 is differential ADC with positive and negative inputs for each port. I am looking to connect negative (-) port to gnd, so I feed the voltage to the positive input. It gives me range from 0 to 2.048V. (readings of ADC are 18-bit) I am looking to convert -55V to +55V range into 0 – 2.048V range.
What do you connect to in + and in-for ADC?
2) If you have a single ended input signal Vin, you just use a zero (ground) or some known reference voltage Vref for for the IN-, and your actual signal for IN+. In this case the output of the ADC will be proportional to (Vin – Vref).
What does + 1.024 V mean in ADC?
You will end up with an inverted output i.e. +1.024 V is represented by -1.024 V but that is trivial once digitized. You need to also watch out for the internal reference accuracy and drift in the ADC – it’s pretty crappy if you want accurate and reliable measurements.
What kind of ADC do I need for Raspberry Pi?
ADC I am using is MCP3424, since it is relatively easy to pair it with Raspberry Pi. MCP3423 is differential ADC with positive and negative inputs for each port. I am looking to connect negative (-) port to gnd, so I feed the voltage to the positive input. It gives me range from 0 to 2.048V. (readings of ADC are 18-bit)
Can a microcontroller return a negative voltage?
Some ADC’s (like the MCP3304, see datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21697e.pdf have a built in differential mode, where the ADC returns the difference of two channels, which can be a negative number.
What are positive and negative voltages for Raspberry Pi?
I am looking into measuring both positive and negative voltages using ADC. My input voltage is in range from -55 to +55V, which is total of 110V. ADC I am using is MCP3424, since it is relatively easy to pair it with Raspberry Pi. MCP3423 is differential ADC with positive and negative inputs for each port.