Can PSU sink current?

Can PSU sink current?

A power supply sinks current when a lower output voltage is selected. Stored energy from the power supply’s output capacitor and external capacitance from the load including the wiring must be dissipated to lower the voltage at the output terminals.

What can be used as current sink?

An example of current sinking is when a series resistor and LED is connected between power (e.g. +5V) and a microcontroller pin. When the microcontroller pin is switched high (logic 1) then the current to the load is switched off. When the microcontroller switches the pin low (logic 0), current flows through the load.

What is a 4-quadrant power supply?

4-quadrant power supplies or 4-quadrant amplifiers are electronic modules which generate both positive and negative voltages, and which can deliver and receive positive and negative currents. They can therefore be used as a source or a sink. Power supplies for laboratory use are mostly only power supplies.

What is a 2 quadrant power supply?

A 2-quadrant power supply—one that provides a positive or negative voltage to the same output terminals—can easily be produced using the LT8714 4-quadrant controller.

What’s all this sink and source current stuff?

One option is to provide your own power source that can supply adequate current, use the port to control whether or not the current flows, and thus turn the LED on and off. This configuration is shown at the bottom, of the figure. Now the digital port no longer supplies (sources) current but is configured to receive (or sink) it.

When do you use current sinking and sourcing?

Current sinking and sourcing is a term used in the field of digital electronics to refer to the direction of direct current (DC) flow between Transistor-Transistor Logic (TTL) gates.

Can a logic gate sink or source DC current?

The input terminal of a logic gate can either sink or source DC current, and the output terminal can sink or source DC current as well. Usually a sourcing output connects to a sinking input. This is the easiest action for beginners and students to visualise and understand. However, it is also possible to have a sinking output and a sourcing input.

When does sink current matter, and what is it?

Anyone who has connected to the digital outputs of data acquisition or data logger systems (for example the digital outputs of our DI-149 and DI-155 Starter Kits) has wrestled with sink and source current specs, and they continue to be a topic of confusion for many. When does sink current matter, and what is it?