What is the sinusoidal voltage?
A sinusoidal voltage source (dependent or independent) produces a voltage that varies as a sine wave with time. A sinusoidal current source (dependent or independent) produces a current that varies with time. The sinusoidal varying function can be expressed either with the sine function or cosine function.
How do you plot voltage in PSpice?
Select PSPICE → Markers → Voltage Level, and place the probe that appears at the top of the 5KΩ resistor. Running and Displaying the Results of the Simulation Run the simulation. This time a display window will open and a graph of the resistor voltage will appear.
What are the sinusoidal input values in PSpice?
The VOFF is set to zero. The VAMPL is set to 9. The FREQ is set to the frequency in Hz. For this source the frequency in Hz is 2/(2π) = 1/π = 0.3183. Figure 1. PSPICE Schematic Probes are placed in the circuit to measure the voltage across the resistor and the current through the inductor.
How to find the voltage source in PSpice?
Browse Cadence PSpice Model Library Part Name Description VOLTAGE_SOURCE DC Voltage Source (AA Enabled) VPULSE Pulse Voltage Source VPWL Piecewise Linear Voltage Source VPWL_ENH Enhanced Piecewise Linear Voltage Source
What happens when the circuit runs to steady state in PSpice?
In this case PSPICE will let the circuit run to steady state BEFORE producing the plot. Thus, the solution will correspond to the steady state solution that we found in class. The method of phasors only produces the steady state solution. The transient part of the solution (homogeneous solution) will not appear.
How is the freq set in PSpice CSUN?
The VOFF is set to zero. The VAMPL is set to 9. The FREQ is set to the frequency in Hz. For this source the frequency in Hz is 2/(2π) = 1/π = 0.3183. Figure 1. PSPICE Schematic Probes are placed in the circuit to measure the voltage across the resistor and the current through the inductor.