Contents
What is courtyard KiCad?
A footprint courtyard is defined by the KiCad documentation as the smallest area that provides a minimum electrical and mechanical clearance around the component.
What is a via KiCad?
Physically, the via is a through-hole (similar to the holes used for through-hole components). The fab will drill a hole in the board, and then plate the hole with copper. This will create an electrical connection from one side of the board to the other.
What is F fab?
The fabrication layers are used to display the simplified mechanical outline of components on the PCB. KiCad refers to the fabrication layers as: F. Fab – Front fabrication layer.
Where do I find ground plane in KiCad?
Look for the highlight tool; it appears in the right toolbar under the basic arrow tool. (Assuming your installation isn’t configured differently than the default, anyway.) With that, simply click on anything connected to ground and it’ll highlight the net for you.
How do I highlight fill areas in KiCad?
Look for the highlight tool; it appears in the right toolbar under the basic arrow tool. (Assuming your installation isn’t configured differently than the default, anyway.) With that, simply click on anything connected to ground and it’ll highlight the net for you. That works for nets, but won’t work for fill areas.
How can I stitch a plane in KiCad?
I found out that I can stitch and connect planes by taking a trace and going through it, but it must be connected to some pin to give it a trace id, otherwise it will insulate itself into a unconnected track. Look for the highlight tool; it appears in the right toolbar under the basic arrow tool.
What are the settings for thermal reliefs in KiCad?
The “Thermal Reliefs” settings control the clearance around the ground pads (0.040″ here) and the width of the traces connecting from the fill to the ground pads (0.009″ here). We’ve found these settings to work pretty well for most of our projects.