What kind of processor is in Tiva C series Launchpad?
Tiva C Series TM4C123G LaunchPad Introduction The TM4C123G is a member of the class of high performance 32 bit ARM cortex M4 microcontroller with a broad set of peripherals developed by Texas Instrumentals. The TIVA launchpad has a built-in processor clock frequency of up to 80MHz with a floating-point unit (FPU).
What is the clock frequency of Tiva tm4c123g Launchpad?
TM4C123GH6PMI Microcontroller Features The TM4C123GH6PMI microcontroller of ARM Cortex-M4F operates at 80MHz clock frequency. The clocked source of the I/O port circuitry of the TIVA board can be enabled using the RCGCGPIO register. The clock source of a pin should be disabled if an I/O port is not used to save power.
Where are the GPIO pins on the TIVA Launchpad?
SW1 push-button switch is connected to the PF0 GPIO pin and the SW2 push-button switch is connected to the PF4 GPIO pin. One onboard tri-color LED is also present on the TIVA launchpad which is internally connected to the F port of the GPIO pins, and when enabled the led shows the color of the enabled pin.
What kind of debugging interface does Tiva tm4c123g use?
The debugging interface used is JTAG and SWD (serial wire debugger) for programming and debugging purposes. The TM4C123G has a vast variety of applications.
Can a Tiva Launchpad work with an Arduino?
Interesting thing is that the LaunchPads from TI have a processing-based language similar to the Arduino which is called Energia which can work with TIVA C series LaunchPads. Below image shows all the on-board components of TIVA LaunchPad. There are two USB connectors and one power select switch.
Which is Tiva Launchpad belongs to Texas Instruments?
Texas Instruments’ Tiva C Series TM4C123G LaunchPad (EK-TM4C123GXL) is one of them, it is a low cost development board based on ARM Coretx-M4F Evaluation Board. This beautiful shiny Red board is fascinating to work just because of the very fact that it belongs to Texas Instruments.
How to upload programs to Tiva C Launchpad?
Then again go to Tools -> Boards and select the LaunchPad (TIVA C) w/ tm4c123 . Once done you should notice the following at the bottom right corner of your Energia IDE. Now click on the upload icon on the top left corner and your program should start uploading to your board.
What kind of memory does Ti Launchpad have?
The company’s Tiva-C LaunchPad series (TI’s wiki on them here) is a pretty impressive board for its size and features an ARM Cortex-M4F SoC with up to 1Mb of Flash memory for storage and up to 256Kb of RAM depending on the model.