Contents
What is a high Q capacitor?
“Traditional High Q” generally refers to a capacitor which employs a porcelain type dielectric which has a very low Dielectric Loss but must be fired at a high temperature (about 1300 degrees C) which necessitates the use of electrode materials with high melting points, such as various Palladium Silver alloys, which …
What is the Q value of a capacitor?
Q Factor definition In an AC system, the Q factor represents the ratio of energy stored in the capacitor to the energy dissipated as thermal losses in the equivalent series resistance. For example, a capacitor that is capable of storing 2000 joules of energy while wasting only 1 joule has a Q factor of 2000.
What is Q capacitance?
The amount of charge that moves into the plates depends upon the capacitance and the applied voltage according to the formula Q=CV, where Q is the charge in Coulombs, C is the capacitance in Farads, and V is the potential difference between the plates in volts.
Why is there no resistance in a capacitor?
Since the capacitor is basically a charge storage, there is no such equation as this hence you can say there is no electrical resistance. But if you define resistance by its truest meaning, the capacitor is resistant to low frequencies but allows high frequency currents to pass through. The impedance (or equivalent resistance)…
What can be used as a high Q capacitor?
At lower frequencies, for example in audio applications, tantalum capacitors may be used as high-Q capacitors. They offer low ESR at sufficiently high frequencies and can sometimes be a viable alternative if higher capacitances (up to around 1mF) are needed by the circuit design.
How is the quality factor of a capacitor defined?
It is defined as: where QC is the quality factor, XC is the reactance of the capacitor, C the capacitance of the capacitor, RC is the equivalent series resistance (ESR) of the capacitor, and ω0 is the frequency in radians at which the measurement is taken.
What is equivalent series resistance in electrolytic capacitors?
Electrolytic capacitors are the solution of choice but it’s important to go beyond specifying capacitance and voltage to consider equivalent series resistance (ESR) as a figure of merit.