How do you tell apart a capacitor?

How do you tell apart a capacitor?

Generally the first two digits indicate the capacitors value and the third digit indicates the number of zero’s to be added. For example, a ceramic disc capacitor with the markings 103 would indicate 10 and 3 zero’s in pico-farads which is equivalent to 10,000 pF or 10nF.

How can you tell if a capacitor is 100nF?

For example, a capacitor can be labelled as, n47 = 0.47nF, 4n7 = 4.7nF or 47n = 47nF and so on. Also, sometimes capacitors are marked with the capital letter K to signify a value of one thousand pico-Farads, so for example, a capacitor with the markings of 100K would be 100 x 1000pF or 100nF.

What does 101 on a capacitor mean?

100 pF
Electronics Components: How to Read Capacitance Values on a Capacitor. The resulting number is the capacitance in pF. For example, 101 represents 100 pF: the digits 10 followed by one additional zero. If there are only two digits listed, the number is simply the capacitance in pF.

What is the value of a capacitor labeled 104?

The 3 digit capacitor code 104 stands for 100 nF, in words: one hundred nanofarads capacitance.

What’s the difference between a 471 and a 470 capacitor?

You can assume that it is a 47pF capacitor. If it’s a K labeled capacitor, the chances that anyone would label a 471 as 470 are small. 470 10% on a small can might be 470pF, but 470K is 47pF. According to this site, 470k would be 47pF…

What’s the difference between UF, NF and PF capacitors?

Capacitor uF – nF – pF Conversion Chart When reading schematics, repairing radios and buying capacitors, you often must convert between uF, nF and pF. Paper and electrolytic capacitors are usually expressed in terms of uF(microfarads).

Which is one millionth of a mica capacitor?

Mica capacitors are usually expressed in terms of pF ( micromicro farads) (picofarads). Short forms for micromicrofarads include pF, mmfd, MMFD, MMF, uuF and PF. A pF is one-millionth of a uF. In between a pF and a uF is a nF which is one-one thousands of a uF. Converting back and forth between uF, nF

What does the letter at the end of a capacitor mean?

For a lot of small capacitors, the letter at the end of the value simply denotes a tolerance. Sometimes, it’s a single letter, and sometimes it’s a string. Generally, I’d take a 470k cap to be 47 pF. You can read more at this link.