Contents
Which of the flip-flop has undefined state?
JK Flip-flop Due to the undefined state in the SR flip-flop, another flip-flop is required in electronics. The JK flip-flop is an improvement on the SR flip-flop where S=R=1 is not a problem.
What are different types of flip flops?
There are basically four different types of flip flops and these are:
- Set-Reset (SR) flip-flop or Latch.
- JK flip-flop.
- D (Data or Delay) flip-flop.
- T (Toggle) flip-flop.
Why is Flip Flop used?
Flip-flops and latches are fundamental building blocks of digital electronics systems used in computers, communications, and many other types of systems. Flip-flops and latches are used as data storage elements.
What’s the initial value of a flip flop?
For simulation in spice, you can also use the “.ic” statement to initialize the internal latch node of the flops to the desired state. So, the flip-flop will eventually stay to ‘1’ or ‘0’ at initial stage.
How can the initial state of a SR flip flop be set?
I built a SR flip-flop circuit according to this schematic with two NPN transistors: I read that the initial state of such a flip-flop is undefined. I observed that in my test circuit it’s always the green LED that’s powered initially, even if I exchange the red and the green LED. How can the initial state of such a flip-flop be set?
How is the Q and q’determined the first time in JK flip flop?
This is the circuit of a JK Flip-Flop with an asynchronous RESET and PRESET. A HIGH on an asynchronous RESET input sets Q to LOW and Q’ to HIGH, and this operation is independent of the clock. Similarly, a HIGH on an asynchronous PRESET input sets Q to HIGH and Q’ to LOW. When the RESET input is HIGH, the output of the NOT gate (U11) will be LOW.
What should the minimum reset voltage be for a flip flop?
You should pick the minimum reset voltage threshold to be a voltage at which your circuit is guaranteed to operate, and ensure your circuit won’t do anything undesirable below the worst-case validity level (1.0V in this case).